Brother CS-770 operation manual Fagoting, Scallop stitching, DTrim along the stitches

Page 51

Fagoting

Stitching across an open seam is called “fagoting”. It is used on blouses and children's clothing. This stitch is more decorative when thicker thread is used.

aUse an iron to fold the two pieces of fabric along their seams.

bBaste the two pieces of fabric, separated by about 4.0 mm (3/16 inch), onto thin paper or a sheet of water-soluble stabilizer.

3

1

2

aThin paper or water soluble stabilizer

bBasting stitching

c4 mm (3/16 inch)

cAttach zigzag foot “J”.

dSelect stitch or .

eSet the stitch width to 7.0 mm (1/4 inch).

•For details, refer to “Selecting stitching” (page 27).

fSew with the center of the presser foot aligned along the center of the two pieces of fabric.

gAfter sewing is finished, remove the paper.

Scallop stitching

The wave-shaped repeating pattern that looks like shells is called “scalloping”. It is used on the collars of blouses and to decorate the edges of handkerchiefs.

aAttach monogramming foot “N”.

 

bSelect stitch .

 

Stitch along the edge of the fabric, making

 

csure not to sew directly on the edge of the

3

fabric.

•For better results, apply spray starch onto the fabric and press with a hot iron before it is sewn.

dTrim along the stitches.

• Be careful not to cut the stitches.

49

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Computerized Sewing Machine Important Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only For safe operation For a longer service lifeContents Utility Stitches Main parts Names of Machine Parts and Their FunctionsNeedle and presser foot section Operation buttonsButtons provided on some models Operation panel Flat bed attachmentASlideopen theit. flat bed attachment to the left to Optional accessories AccessoriesCTo turn off the machine, set the main power switch to Using Your Sewing MachinePower supply precautions BSet the main power switch toChanging the needle stop position Foot controllerETurn on the sewing machine Threading the MachineWinding the bobbin Pass the thread around the pre-tension diskGTrim the excess thread above the bobbin CSlide the bobbin winder shaft to the right For models equipped with the fast bobbin winding systemActual size 11.5mm 7/16 inch This model Lower threadingFor models equipped with the quick-set bobbin Right side see arrow b until the cover clicks into placeUpper threading Thread take-up lever Catch the thread on the hook as shown below DFully lower the needle threader leverDrawing up the lower thread For models equipped with the quick-set bobbinLightly hold the end of the upper thread Fabrics Needle precautionsReplacing the Needle Needle types and their usesIncorrect needle Checking the needleReplacing the needle Correct needleInstalling the needle clamp Twin needle threading Sewing with a twin needleReplacing the Presser Foot Replacing the presser footMark on the wheel points up. With models Remove the presser foot Removing the presser foot holderRemoving the presser foot holder Attaching the presser foot holderSewing General sewing procedureCAttach the presser foot DIfwidth.necessary, adjust the stitch lengthSelecting stitching Turn on the sewing machineStarting to sew On the wheel points up. With models equippedBRaise the presser foot lever Upper tension is too tight Thread tensionSewing reinforcement stitches Correct tensionSewing curves Useful Sewing TipsTrial sewing Changing the sewing directionSlide the flat bed attachment to the left to release it Using a free-arm styleSewing thin fabrics Sewing stretch fabricsAttach overcasting foot G or zigzag foot J Select a stitch Overcasting StitchesChanging the needle position When sewing is finished, cut the threadBasic Stitching Basic stitchingBlind HEM Stitching BAttach blind hem foot R CSelect a stitchIf the needle does not catch the hem fold Buttonholes can be sewn and buttons can be sewn on Buttonhole SewingIf the button does not fit in the button guide plate Size of the buttonhole is setFPullpossible.down the buttonhole lever as far as Button sewing Sewing buttonholes on stretch fabricsCAttach presser foot M With stitch Select stitch ESelect a stitchRev. Reverse Zipper InsertionSewing Stretch Fabrics and Elastic Tape Stretch stitchingElastic attaching Appliqués APPLIQUÉ, Patchwork and Quilt StitchingPiecing Patchwork crazy quilt stitchingDSelect stitch , or Using the optional quilting guideQuilting Baste the fabric to be quiltedGAfter sewing is finished, slide the feed dog Free-motion quiltingAttach zigzag foot J Select stitch Start sewing Reinforcement StitchingTriple stretch stitching Bar tack stitchingPullpossible.down the buttonhole lever as far as Once sewing is completed,Decorative Stitching Fagoting Scallop stitchingDTrim along the stitches DPull the bobbin threads to create gathers SmockingShell tuck stitching Sew parallel stitching at intervals of 1 cm 3/8 inchJoining Heirloom stitchingUnfold the fabric, and then iron the tucks down to one side Utility stitches Stitch SettingsRfc. Reinforcement Pattern No Rfc Binding Appendix Maintenance Cleaning the machine surfaceCleaning the bobbin case Remove the bobbin case Troubleshooting Fabric is LowerOr breaks Thread tenPitched noise While sewing Stitches areSkipped There is a highOperation beep for models equipped with the operation beep Error MessagesNumerics Index30, 32 Page English 885-S33/S34/S36/S37 XC8835-7219

CS-770 specifications

The Brother CS-770 is a versatile sewing machine that combines advanced technology with user-friendly features, making it an ideal choice for both beginners and seasoned sewists. This model stands out with its robust construction and sleek design, ensuring durability and performance.

One of the key features of the Brother CS-770 is its impressive range of stitch options. The machine boasts 140 built-in stitches, including utility, decorative, and heirloom stitches. This extensive selection offers users the flexibility to create a variety of projects, from simple hems to intricate quilt patterns. The stitches are easily accessible through an intuitive LCD screen, which displays the selected stitch and allows for quick adjustments.

Another highlight of the CS-770 is its automatic needle threader. This convenient technology eliminates the frustration often associated with threading the needle, allowing sewists to focus on their projects instead. Additionally, the drop-in bobbin system simplifies the process of loading the bobbin, reducing downtime and enhancing efficiency.

The machine features a 7-point feed dog system, ensuring smooth and even fabric feeding, whether working with delicate fabrics or heavier materials. This powerful feed mechanism is complemented by a range of presser feet, including a walking foot and a quilting foot, enhancing the machine’s versatility for different sewing tasks.

For those interested in quilting, the Brother CS-770 includes a wide table attachment, providing extra support for larger projects. This feature is particularly beneficial for quilters, allowing them to maneuver their work with ease. The machine also supports free-motion quilting, giving users the freedom to create unique designs.

Other notable characteristics of the Brother CS-770 include adjustable sewing speed, allowing users to set the pace according to their comfort level. The machine also has an auto-declutch bobbin winder, ensuring even and consistent bobbin winding. With built-in storage for accessories and a hard case for protection, this sewing machine is designed for ease of use and convenience.

Overall, the Brother CS-770 integrates innovative sewing technologies with practical features, making it a reliable choice for a wide range of sewing projects. Whether you are a hobbyist looking to dive into new techniques or an experienced sewist seeking a dependable machine, the CS-770 is equipped to meet various sewing needs. Its balance of functionality and user-friendly design makes it a standout model in Brother’s acclaimed lineup of sewing machines.
Top Page Image Contents