Brother PC-2800 operation manual Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic safety precautions should always be taken, including the following:

Read all instructions before using.

DANGER - To reduce the risk of electric shock:

1.The machine should never be left unattended while plugged in. Always unplug the machine from the electrical outlet immediately after using and before cleaning.

2.Always unplug before changing the light bulb. Replace bulb with same type rated 12V 5 watts.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:

1.Do not allow this machine to be used as a toy. Close attention is necessary when the machine is used by or near children.

2.Use this machine only for its intended use as described in this manual. Use only accessories recommended by the manufacturer as contained in this manual.

3.Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the machine to the nearest author- ized dealer or service center for examination, repair, electrical or mechanical adjustment.

4.Never operate the machine with any air openings blocked. Keep ventilation openings of the machine and foot control free from the accumulation of lint, dust, and loose cloth.

5.Never drop or insert any object into any opening.

6.Do not use outdoors.

7.Do not operate where aerosol (spray) products are being used or where oxygen is being ad- ministered.

8.To disconnect, turn the main switch to the symbol “” position which represents off, then re- move plug from outlet.

9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10.Keep fingers away from all moving parts. Special care is required around the machine needle. 11.Always use the proper needle plate. The wrong plate can cause the needle to break.

12.Do not use bent needles.

13.Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

14.Switch the machine to the symbol “” position when making any adjustments in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like.

15.Always unplug the machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.

16.This sewing machine is not intended for use by young children or infirm persons without super- vision.

17.Young children should be supervised to ensure that they do not play with this machine.

SAVE THESE INSTRUCTIONS

This machine is intended for household use.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Sewing Machine Important Safety Instructions For Users in the UK, EIRE, Malta Cyprus only Congratulations on Choosing OUR Machine Contents Maintenance Before USE Part NamesPresser foot symbol Main power switchPower cord Foot controller jackStandard Accessories Optional Accessories Operation Panel Using the operation buttons Operation ButtonsPower Supply 324,9 Bobbin Winding / Bobbin Thread SettingWinding the bobbin and setting the bobbin thread Spool cap Spool pinSpring on the shaft Groove of the bobbin Built-in thread cutter Setting the bobbinBobbin cover Bobbin cover release button Upper Threading Upper threading shutterNeedle threader lever Guide Large hook Thread take-up leverNeedle clamp thread guide Second set of hooks Third hook Net Using the extra spool pin and the netExtra spool pin Net Thread spool Spool pin Spool capFoot controller Starting and Stopping SewingSTART/STOP button Foot controller Foot controller jackLit LED lamp shows the selection Stitch pattern switch key Selecting a Stitch PatternNot adjustable Loosening the upper thread tension Thread TensionCorrect upper thread tension Wrong side Right side Upper thread Bobbin threadTightening the upper thread tension Changing the presser foot Removing the presser foot holder while cleaning, etcPresser Foot Attaching the Optional Walking Foot Needle clamp screw Operating lever Walking foot shankFeed DOG Needle Installing the needle securelyNeedle stopper Hole for setting needle Flat side of needle Checking the needleFabric Thread Size of needle Type FABRIC/THREAD/NEEDLE Combination ChartAbout the Needle Sewing using a utility stitch Trial SewingYou can begin sewing without drawing up the bobbin thread Thread cutterWhen the needle stop position switch keys LED lamp is Setting the Needle Stop Down PositionCanceling the needle stop down position setting Lit, the needle stop position is set to the down positionStitch Width and Length Adjusting the stitch widthAdjusting the stitch length Up Wider Down NarrowerSewing curves Useful SkillsSewing corners Sewing a curve with a straight stitchFabric Thick paper Sewing heavyweight fabricsSewing lightweight fabrics 15 mm 9/16 Using the needle plateFree-arm sewing Straight Stitches To 4 reverse stitchesBasting Sewing stretch fabricsChanging the stitch length Sewing curves using a zigzag stitch Overcasting using a zigzag stitchAppliqué using a zigzag stitch Zigzag StitchesOvercasting Stitches Sewing using stitch 7 orSewing using stitch 4 or Overcasting When Using the Optional Side Cutter Needle clamp screw Operating leverSeam margin 20 mm 3/4Guide plate lower knife Presser foot Blind HEM Stitching Adjusting the needle drop point Buttonhole Stitching Metal bracket Eyelet punch Basting pinReinforcement stitch Buttonhole sewing orderSewing stretch fabrics 13 10 mm 3/8 Changing the stitch width For sewing eyelets on belts, etc Eyelet StitchSize of eyelet actual size Large Medium SmallCentered zipper Make sure you sew using the middle needle positionZipper Insertion For attaching zippersFabric When using zipper foot I, make sure the straightNeedle will strike the presser foot, causing End of zipper openingRight Left Needle drop position Basting stitches To 10 mm 1/4 to 3/8 Reverse stitches 50 mmDart Seam Seam line 10 to 15 mm 3/8 to 9/16 About 50 mm GatheringUpper thread Bobbin thread About 50 mm Pulling up the bobbin thread ShuttlePintuck For decorating blouses, etcAbout 12 mm 1/2 Wrong side of fabric Flat Fell SeamFor reinforcing seams and neatly finishing edges Finish line Wrong side of fabricFinished flat fell seam Appliqué Fabric glue AppliquésSewing sharp curves Appliqué materialRight side of fabric Beforeuse Scallop StitchEtc About 10 mm 3/8 Smocking StitchFor making decorative stitching Mm 3/16 Paper Basting stitches FagotingFor fagoting, decorating, etc Changing the size of a decorative stitch Decorative StitchingDecorative stitching Rative stitching on shirtfronts Hemstitch Heirloom StitchHemstitching Lamp is turned off Lamp is litIllustration of finished product Manually Decorative stitches where the zigzag width can be changedTwin Needle StopperStitch length Types of threadStabilizer SewingSewing attractive finishes Thin paperCleaning the machine casing Cleaning the MachineCleaning the operation panel Cleaning the race and shuttleDo not oil the shuttle or the race Same position as when you removed the raceRace Brush Check that the notch on the shuttle isChanging the Light Bulb Screw Light coverTrouble Shooting Trouble with threads and stitchesAlarm Mechanical troubleSewing Chart Programmed Machine Decorative Patterns Programmed in Machine Utility stitches Decorative stitchesPage Page Page English 194953-011

PC-2800 specifications

The Brother PC-2800 is a versatile and compact typewriter designed for both home and office use. With a focus on convenience and user-friendliness, it offers a range of features that cater to the needs of modern typists. One of its standout characteristics is its built-in printer, which allows users to produce high-quality printed documents without the need for a separate printer.

One of the main features of the PC-2800 is its auto-correction technology. This innovative feature helps prevent typographical errors by automatically correcting common mistakes as you type, saving time and ensuring that the final output is polished. Additionally, this device offers a variety of fonts and styles to choose from, enabling users to customize their documents to better fit their personal or professional needs.

Another notable aspect of the Brother PC-2800 is its memory capacity. With the ability to store multiple documents, it allows users to easily switch between projects without the hassle of retyping. This feature is particularly useful for students, writers, and anyone who frequently works on various documents simultaneously. The typewriter’s LCD display provides a clear view of typed text, making it easy to follow along as you compose your work.

The PC-2800 utilizes thermal printing technology, which ensures that documents are produced with crisp and clear text. This form of printing is not only efficient but also quiet, making it an ideal choice for shared work environments. The Brother PC-2800 is also equipped with a range of connectivity options, allowing users to easily link the device to computers or other devices for seamless printing.

In terms of design, the Brother PC-2800 is compact and lightweight, making it easily portable. This design is perfect for those who may need to take their typewriter on the go, whether for meetings, classes, or simply to work in different locations. The user-friendly interface and intuitive controls make it accessible for individuals of varying skill levels, from novices to experienced typists.

In summary, the Brother PC-2800 is a reliable and multifunctional typewriter that merges traditional typing with modern technology. Its auto-correction feature, generous memory capacity, thermal printing technology, and user-friendly design make it an excellent choice for anyone in need of a durable and efficient typing solution. Whether for personal use, academic purposes, or professional environments, the PC-2800 stands out as an impressive tool for document creation.
Top Page Image Contents