Brother PC-2800 operation manual Attaching the Optional Walking Foot

Page 26

ATTACHING THE OPTIONAL WALKING FOOT

This foot is very useful for sewing materials such as vinyl cloth, synthetic leather, thin leather, etc. These materials are difficult to feed when sewing but this foot can prevent such materials from crumpling, slipping or sticking to presser foot thanks to even feeding of upper and lower materials.

 

1

2

3

•

You can use walking foot for sewing STRAIGHT STITCH (

 

·

 

) and ZIGZAG STITCH ( ).

 

 

 

 

•

Reverse stitches can not be sewn with the walking foot.

 

 

 

 

 

 

 

 

 

 

 

 

Note

You can not use this foot for sewing other patterns.

1. Push the “NEEDLE POSITION” button to raise the needle, and then turn off the power.

2. Raise the presser foot lever and remove the presser foot.

3. Use the included disc-shaped screwdriver to loosen the screw of the presser foot holder, and remove the presser foot holder.

CONTENTS

BEFORE USE

SEWING

5

6

1

2

3

4.Set the operation lever of the walking foot so that the fork sur- rounds the needle clamp screw, and set the walking foot shank on the presser foot shaft.

1Needle clamp screw

2 Operating lever

3 Walking foot shank

5.Lower the presser foot lever, insert the presser foot holder screw, and tighten the screw securely with the disc-shaped screwdriver.

UTILITY STITCHES

5

6

CAUTION

•Use the disc-shaped screwdriver to tighten the screw securely. If the screw is loose, the needle may strike the presser foot and cause injury.

•Be sure to turn the balance wheel toward the front of the machine to check that the needle does not strike the presser foot. If the needle strikes the presser foot, injury may result.

CAUTION

When sewing with the walking foot, sew at medium to low speeds.

PATTERNS MAINTENANCESEWING CHART(PROGRAMMED IN MACHINE)

23

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Sewing Machine Important Safety Instructions For Users in the UK, EIRE, Malta Cyprus only Congratulations on Choosing OUR Machine Contents Maintenance Before USE Part NamesPresser foot symbol Main power switchPower cord Foot controller jackStandard Accessories Optional Accessories Operation Panel Using the operation buttons Operation ButtonsPower Supply 324,9 Bobbin Winding / Bobbin Thread SettingWinding the bobbin and setting the bobbin thread Spool cap Spool pinSpring on the shaft Groove of the bobbin Built-in thread cutter Setting the bobbinBobbin cover Bobbin cover release button Upper Threading Upper threading shutterNeedle threader lever Guide Large hook Thread take-up leverNeedle clamp thread guide Second set of hooks Third hook Net Using the extra spool pin and the netExtra spool pin Net Thread spool Spool pin Spool capFoot controller Starting and Stopping SewingSTART/STOP button Foot controller Foot controller jackLit LED lamp shows the selection Stitch pattern switch key Selecting a Stitch PatternNot adjustable Loosening the upper thread tension Thread TensionCorrect upper thread tension Wrong side Right side Upper thread Bobbin threadTightening the upper thread tension Changing the presser foot Removing the presser foot holder while cleaning, etcPresser Foot Attaching the Optional Walking Foot Needle clamp screw Operating lever Walking foot shankFeed DOG Needle Installing the needle securelyNeedle stopper Hole for setting needle Flat side of needle Checking the needleFabric Thread Size of needle Type FABRIC/THREAD/NEEDLE Combination ChartAbout the Needle Sewing using a utility stitch Trial SewingYou can begin sewing without drawing up the bobbin thread Thread cutterWhen the needle stop position switch keys LED lamp is Setting the Needle Stop Down PositionCanceling the needle stop down position setting Lit, the needle stop position is set to the down positionStitch Width and Length Adjusting the stitch widthAdjusting the stitch length Up Wider Down NarrowerSewing curves Useful SkillsSewing corners Sewing a curve with a straight stitchFabric Thick paper Sewing heavyweight fabricsSewing lightweight fabrics 15 mm 9/16 Using the needle plateFree-arm sewing Straight Stitches To 4 reverse stitchesBasting Sewing stretch fabricsChanging the stitch length Sewing curves using a zigzag stitch Overcasting using a zigzag stitchAppliqué using a zigzag stitch Zigzag StitchesOvercasting Stitches Sewing using stitch 7 orSewing using stitch 4 or Overcasting When Using the Optional Side Cutter Needle clamp screw Operating leverSeam margin 20 mm 3/4Guide plate lower knife Presser foot Blind HEM Stitching Adjusting the needle drop point Buttonhole Stitching Metal bracket Eyelet punch Basting pinReinforcement stitch Buttonhole sewing orderSewing stretch fabrics 13 10 mm 3/8 Changing the stitch width For sewing eyelets on belts, etc Eyelet StitchSize of eyelet actual size Large Medium SmallCentered zipper Make sure you sew using the middle needle positionZipper Insertion For attaching zippersFabric When using zipper foot I, make sure the straightNeedle will strike the presser foot, causing End of zipper openingRight Left Needle drop position Basting stitches To 10 mm 1/4 to 3/8 Reverse stitches 50 mmDart Seam Seam line 10 to 15 mm 3/8 to 9/16 About 50 mm GatheringUpper thread Bobbin thread About 50 mm Pulling up the bobbin thread ShuttlePintuck For decorating blouses, etcAbout 12 mm 1/2 Wrong side of fabric Flat Fell SeamFor reinforcing seams and neatly finishing edges Finish line Wrong side of fabricFinished flat fell seam Appliqué Fabric glue AppliquésSewing sharp curves Appliqué materialRight side of fabric Beforeuse Scallop StitchEtc About 10 mm 3/8 Smocking StitchFor making decorative stitching Mm 3/16 Paper Basting stitches FagotingFor fagoting, decorating, etc Changing the size of a decorative stitch Decorative StitchingDecorative stitching Rative stitching on shirtfronts Hemstitch Heirloom StitchHemstitching Lamp is turned off Lamp is litIllustration of finished product Manually Decorative stitches where the zigzag width can be changedTwin Needle StopperStitch length Types of threadStabilizer SewingSewing attractive finishes Thin paperCleaning the machine casing Cleaning the MachineCleaning the operation panel Cleaning the race and shuttleDo not oil the shuttle or the race Same position as when you removed the raceRace Brush Check that the notch on the shuttle isChanging the Light Bulb Screw Light coverTrouble Shooting Trouble with threads and stitchesAlarm Mechanical troubleSewing Chart Programmed Machine Decorative Patterns Programmed in Machine Utility stitches Decorative stitchesPage Page Page English 194953-011

PC-2800 specifications

The Brother PC-2800 is a versatile and compact typewriter designed for both home and office use. With a focus on convenience and user-friendliness, it offers a range of features that cater to the needs of modern typists. One of its standout characteristics is its built-in printer, which allows users to produce high-quality printed documents without the need for a separate printer.

One of the main features of the PC-2800 is its auto-correction technology. This innovative feature helps prevent typographical errors by automatically correcting common mistakes as you type, saving time and ensuring that the final output is polished. Additionally, this device offers a variety of fonts and styles to choose from, enabling users to customize their documents to better fit their personal or professional needs.

Another notable aspect of the Brother PC-2800 is its memory capacity. With the ability to store multiple documents, it allows users to easily switch between projects without the hassle of retyping. This feature is particularly useful for students, writers, and anyone who frequently works on various documents simultaneously. The typewriter’s LCD display provides a clear view of typed text, making it easy to follow along as you compose your work.

The PC-2800 utilizes thermal printing technology, which ensures that documents are produced with crisp and clear text. This form of printing is not only efficient but also quiet, making it an ideal choice for shared work environments. The Brother PC-2800 is also equipped with a range of connectivity options, allowing users to easily link the device to computers or other devices for seamless printing.

In terms of design, the Brother PC-2800 is compact and lightweight, making it easily portable. This design is perfect for those who may need to take their typewriter on the go, whether for meetings, classes, or simply to work in different locations. The user-friendly interface and intuitive controls make it accessible for individuals of varying skill levels, from novices to experienced typists.

In summary, the Brother PC-2800 is a reliable and multifunctional typewriter that merges traditional typing with modern technology. Its auto-correction feature, generous memory capacity, thermal printing technology, and user-friendly design make it an excellent choice for anyone in need of a durable and efficient typing solution. Whether for personal use, academic purposes, or professional environments, the PC-2800 stands out as an impressive tool for document creation.
Top Page Image Contents