Brother PC-2800 operation manual Zipper Insertion, Centered zipper, For attaching zippers

Page 51

ZIPPER INSERTION

I

 

 

 

 

 

2

For attaching zippers

CONTENTS

Centered zipper

3

2

3

1

2

CAUTION

Make sure you sew using the middle needle position.

1.Attach presser foot “J” and sew straight stitches up to the zip- per opening. Change to a basting stitch and sew to the top of the fabric.

1End of zipper opening

2 Reverse stitches

3 Basting stitches

4 Wrong side of fabric

2.Press the seam allowance open and attach the zipper with a basting stitch in the middle of each side.

1Zipper

2Basting stitches

3 Wrong side of fabric

3.Remove presser foot “J”. Align the right side of the pin in zip- per foot “I” with the presser foot holder, and attach the zipper foot.

1Right

2 Left

3 Needle drop position

CAUTION

When using zipper foot “I”, make sure the straight stitch, middle needle position is selected. Turn the balance wheel to make sure the needle does not strike the presser foot. If another stitch is selected, the needle will strike the presser foot, causing the needle to break and possibly leading to injury.

BEFORE USE

SEWING

UTILITY STITCHES MAINTENANCESEWING CHART

5

6

4.Topstitch 7 to 10 mm (1/4 to 3/8'') from the seamed edge of the fabric, then remove the basting.

CAUTION

Make sure the needle does not strike the zipper dur- ing sewing. If the needle strikes the zipper, the nee- dle may break, leading to injury.

PATTERNS (PROGRAMMED IN MACHINE)

48

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Sewing Machine Important Safety Instructions For Users in the UK, EIRE, Malta Cyprus only Congratulations on Choosing OUR Machine Contents Maintenance Part Names Before USEFoot controller jack Main power switchPower cord Presser foot symbolStandard Accessories Optional Accessories Operation Panel Operation Buttons Using the operation buttonsPower Supply Spool cap Spool pin Bobbin Winding / Bobbin Thread SettingWinding the bobbin and setting the bobbin thread 324,9Spring on the shaft Groove of the bobbin Setting the bobbin Bobbin cover Bobbin cover release buttonBuilt-in thread cutter Upper threading shutter Upper ThreadingThread take-up lever Needle clamp thread guideNeedle threader lever Guide Large hook Second set of hooks Third hook Net Thread spool Spool pin Spool cap Using the extra spool pin and the netExtra spool pin NetFoot controller Foot controller jack Starting and Stopping SewingSTART/STOP button Foot controllerSelecting a Stitch Pattern Lit LED lamp shows the selection Stitch pattern switch keyNot adjustable Wrong side Right side Upper thread Bobbin thread Thread TensionCorrect upper thread tension Loosening the upper thread tensionTightening the upper thread tension Removing the presser foot holder while cleaning, etc Presser FootChanging the presser foot Needle clamp screw Operating lever Walking foot shank Attaching the Optional Walking FootFeed DOG Checking the needle Installing the needle securelyNeedle stopper Hole for setting needle Flat side of needle NeedleFABRIC/THREAD/NEEDLE Combination Chart About the NeedleFabric Thread Size of needle Type Trial Sewing Sewing using a utility stitchThread cutter You can begin sewing without drawing up the bobbin threadLit, the needle stop position is set to the down position Setting the Needle Stop Down PositionCanceling the needle stop down position setting When the needle stop position switch keys LED lamp isUp Wider Down Narrower Adjusting the stitch widthAdjusting the stitch length Stitch Width and LengthSewing a curve with a straight stitch Useful SkillsSewing corners Sewing curvesSewing heavyweight fabrics Sewing lightweight fabricsFabric Thick paper Using the needle plate Free-arm sewing15 mm 9/16 To 4 reverse stitches Straight StitchesSewing stretch fabrics Changing the stitch lengthBasting Zigzag Stitches Overcasting using a zigzag stitchAppliqué using a zigzag stitch Sewing curves using a zigzag stitchSewing using stitch 7 or Sewing using stitch 4 orOvercasting Stitches Needle clamp screw Operating lever Overcasting When Using the Optional Side Cutter20 mm 3/4 Guide plate lower knife Presser footSeam margin Blind HEM Stitching Adjusting the needle drop point Buttonhole Stitching Eyelet punch Basting pin Metal bracketButtonhole sewing order Sewing stretch fabrics 13Reinforcement stitch 10 mm 3/8 Changing the stitch width Large Medium Small Eyelet StitchSize of eyelet actual size For sewing eyelets on belts, etcFor attaching zippers Make sure you sew using the middle needle positionZipper Insertion Centered zipperEnd of zipper opening When using zipper foot I, make sure the straightNeedle will strike the presser foot, causing FabricBasting stitches To 10 mm 1/4 to 3/8 Reverse stitches 50 mm Right Left Needle drop positionDart Seam Gathering Upper thread Bobbin thread About 50 mmSeam line 10 to 15 mm 3/8 to 9/16 About 50 mm Shuttle Pulling up the bobbin threadFor decorating blouses, etc PintuckFinish line Wrong side of fabric Flat Fell SeamFor reinforcing seams and neatly finishing edges About 12 mm 1/2 Wrong side of fabricFinished flat fell seam Appliqué material AppliquésSewing sharp curves Appliqué Fabric glueScallop Stitch EtcRight side of fabric Beforeuse Smocking Stitch For making decorative stitchingAbout 10 mm 3/8 Fagoting For fagoting, decorating, etcMm 3/16 Paper Basting stitches Decorative Stitching Decorative stitchingChanging the size of a decorative stitch Lamp is turned off Lamp is lit Hemstitch Heirloom StitchHemstitching Rative stitching on shirtfrontsIllustration of finished product Stopper Decorative stitches where the zigzag width can be changedTwin Needle ManuallyTypes of thread Stitch lengthThin paper SewingSewing attractive finishes StabilizerCleaning the race and shuttle Cleaning the MachineCleaning the operation panel Cleaning the machine casingBrush Check that the notch on the shuttle is Same position as when you removed the raceRace Do not oil the shuttle or the raceScrew Light cover Changing the Light BulbTrouble with threads and stitches Trouble ShootingMechanical trouble AlarmSewing Chart Programmed Machine Decorative Utility stitches Decorative stitches Patterns Programmed in MachinePage Page Page English 194953-011

PC-2800 specifications

The Brother PC-2800 is a versatile and compact typewriter designed for both home and office use. With a focus on convenience and user-friendliness, it offers a range of features that cater to the needs of modern typists. One of its standout characteristics is its built-in printer, which allows users to produce high-quality printed documents without the need for a separate printer.

One of the main features of the PC-2800 is its auto-correction technology. This innovative feature helps prevent typographical errors by automatically correcting common mistakes as you type, saving time and ensuring that the final output is polished. Additionally, this device offers a variety of fonts and styles to choose from, enabling users to customize their documents to better fit their personal or professional needs.

Another notable aspect of the Brother PC-2800 is its memory capacity. With the ability to store multiple documents, it allows users to easily switch between projects without the hassle of retyping. This feature is particularly useful for students, writers, and anyone who frequently works on various documents simultaneously. The typewriter’s LCD display provides a clear view of typed text, making it easy to follow along as you compose your work.

The PC-2800 utilizes thermal printing technology, which ensures that documents are produced with crisp and clear text. This form of printing is not only efficient but also quiet, making it an ideal choice for shared work environments. The Brother PC-2800 is also equipped with a range of connectivity options, allowing users to easily link the device to computers or other devices for seamless printing.

In terms of design, the Brother PC-2800 is compact and lightweight, making it easily portable. This design is perfect for those who may need to take their typewriter on the go, whether for meetings, classes, or simply to work in different locations. The user-friendly interface and intuitive controls make it accessible for individuals of varying skill levels, from novices to experienced typists.

In summary, the Brother PC-2800 is a reliable and multifunctional typewriter that merges traditional typing with modern technology. Its auto-correction feature, generous memory capacity, thermal printing technology, and user-friendly design make it an excellent choice for anyone in need of a durable and efficient typing solution. Whether for personal use, academic purposes, or professional environments, the PC-2800 stands out as an impressive tool for document creation.
Top Page Image Contents