HOW to CUT and Connect the Tubes

Your Reverse Osmosis Water System includes push-in

Foam Plug

Push In FittingN,. _

fittings for quick tubing connection. Review the follow- ing instructions before connecting the tubes in the next step.

Cut tubes to length

1.Use a sharp cutter or knife to cut the end of tubing. Always cut the tubing square. See Figure 17.

2.inspect the end (about 1") of the tubing to be sure there are no nicks, scratches or other rough spots, if needed, cut the tubing again. See Figure 17.

NOTE: Tubing lengths should allow for the removal of the assembly from the hanger washers for servicing, if tubing lengths are shortened for heater appearance, it

may be necessary to keep the assembly on the hanger washers for service.

Connect tubes

NOTE: Remove protective foam plugs before connect- ing tubes (See Fig. 16). Discard foam plugs.

1.Push tubing through collet, until it engages the o-ring. See Figure 18A. Continue pushing until the tube bot- toms out against the back of the fitting. See Figure 18B. A common mistake is to stop pushing when the tube engages the o-ring. This will lead to future leaks.

When a 1/4" tube is fully engaged, 11/16" of the tube has entered the fitting. When a 3/8" tube is fully engaged, 3/4" of the tube has entered the fitting. See Figures 18A & 18B.

2.if using tubing other than tubing supplied with the

system, be sure it is of high quality, exact size and roundness with a smooth surface.

To Disconnect Tubes

1.Push the collet inward with a finger tip. See Figure 20.

2.Continue holding collet inward while pulling the tub- ing out. See Figure 20.

Remove and Discard Foam Plugs

Figure 16

Push In Fitting

TubeNN_

Cut tubing square with end of tubing round, smooth, with no cuts, nicks or flat spots.

Tube Correctly Cut

Figure 17

O-Ring

Tube Partially Engaged With Fitting

Figure 18A

O-Ring

Tube Fully Engaged With Fitting

Figure 18B

Collet (Depress to

Remove Tubing) .

	Fitting
O	O-Ring Seal
	Collet
	Collet and O-Ring	Disconnect	Tubing
	Figure 19		Figure 20

Questions? Call The Kenmore Water Line 1-800-426-9345or visit KenmoreWater.com

625.38156 specifications

The Kenmore 625.38156 is a highly regarded air purifier known for its efficient performance and reliable functionality, making it a popular choice among consumers seeking improved indoor air quality. It boasts a sleek, modern design that fits well into a variety of home environments, from living rooms to bedrooms.

One of the standout features of the Kenmore 625.38156 is its HEPA (High-Efficiency Particulate Air) filtration system. This technology is designed to capture 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, pet dander, and smoke. This level of filtration ensures that the air you breathe is significantly cleaner, which can be especially beneficial for allergy sufferers and those with respiratory issues.

Additionally, the Kenmore 625.38156 incorporates a multi-stage filtration process that includes a pre-filter designed to capture larger particles and extend the life of the HEPA filter. This allows users to enjoy improved air quality without the frequent and costly replacement of filters. The unit also features an activated carbon layer that effectively reduces odors from pets, cooking, and other common household sources, further enhancing the freshness of the air.

The air purifier is equipped with advanced fan technology, providing multiple speed settings and an overall quiet operation. This feature allows users to run the unit during the day or night without disrupting their routine or sleep. The energy-efficient design of the Kenmore 625.38156 also makes it an environmentally friendly option, consuming less power while delivering optimal performance.

Another significant characteristic of this air purifier is its user-friendly controls and digital display, which provide real-time feedback on air quality levels. With intuitive controls, users can easily adjust the settings to suit their preferences, ensuring custom air purification tailored to their needs.

Combined with its stylish aesthetics and compact form factor, the Kenmore 625.38156 offers an effective solution for improving indoor air quality. Whether for a small room or a spacious living area, this air purifier stands out as a reliable and efficient choice for anyone seeking to breathe easier at home.