Kenmore 625.38156 owner manual Flow Control, Change Collet and O-RING, Change Battery

Page 21

FLOW CONTROL

The flow control is vital for proper operation of the Reverse Osmosis membrane cartridge. See Figure 26. The flow control, located in the red tube at the system hous- ing, keeps water flowing through the membrane at the required rate. This is to ensure the system produces the best quality product water.

Periodically check the flow control assembly to be sure the small hole through it is clean and unrestricted.

if the flow control assembly requires service, review the exploded view in Figure 26. Assemble and disassemble as shown.

CHANGE COLLET AND O-RING

1.Remove the collet and o-ring from the fitting with a small screwdriver. Be careful not to scratch the inter-

nal walls of the collet port. See Figures 27 & 28.

2.Clean collet port, lubricate and insert the o-ring seal into the bottom of the port. See Figures 27 & 28.

3.Push the collet inward until it locks in place. See Figures 27 & 28.

CHANGE BATTERY

To change battery, complete the following steps.

1.Loosen the screw on the right side of the faucet base. See Figure 29.

2.Press the battery housing upwards from the front faucet base until it releases from the faucet base. See

Figure 29.

3.Replace the battery (Maxell CR 2032 or equivalent). Place battery into the holder with the positive (+) side facing the back of the holder.

4.When the battery is first replaced it will flash six times and turn off. This indicates the battery is fully charged. After the six flashes the timer enters the 6 month time cycle, if it repeatedly flashes just two times, it is not a fully charged battery:

5.Re-install the battery housing and firmly tighten the mounting screw. See Figure 29.

i (...].

Flow Control Insert

.....ifz

i_...._ 1/4" Red Tubing

Drain

Figure 26

Push o-ring seal into bottom of port then follow with collet.

Fitting

O-Ring Seal

Collet

Change collet and o-ring

Figure 27

Collet (depress to remove tubing)

Disconnect Tubing

Figure 28

Battery

Bartery

negative(-)_.__

FaBuce; _

_

Screw

Figure 29

Questions? Call The Kenmore Water Line 1-800-426-9345or visit KenmoreWater.com

21

Image 21
Contents Osmosis ONE Year Full Warranty on Reverse Osmosis System Osmosis Inspect Shipment Under the Sink Location Plan Your InstallationRemote Location Check Space RequirementsTypical Under Sink Installation Overview Prepare Site for InstallationInstall Saddle Valve Choose Type of Water Fitting to InstallIntroduction Under The Sink InstallationRemote Location Install Storage Tank Install Reverse Osmosis Filter AssemblySelect Location of Reverse Osmosis Faucet Mounting Hole Install Reverse Osmosis FaucetFaucet Electronics Install BatteryRemove and Discard Foam Plugs HOW to CUT and Connect the TubesOsmosis Connect RED Tube to Reverse Osmosis FaucetSanitize the System Purging the System Pressure Test the SystemHOW Your Reverse Osmosis System Works Membrane PREFILTER/POSTFILTER Maintenance RO Membrane Cartridge MaintenancePREFILTER/POSTFILTER Cartridge Replacement Change Battery Flow ControlChange Collet and O-RING TDS Page Cause Postfitterexpended Iiiii!!!i!iii!i i!i Iii!i!iii!i 110 Description Iiiiiiiiiiiiiiiiiiii

625.38156 specifications

The Kenmore 625.38156 is a highly regarded air purifier known for its efficient performance and reliable functionality, making it a popular choice among consumers seeking improved indoor air quality. It boasts a sleek, modern design that fits well into a variety of home environments, from living rooms to bedrooms.

One of the standout features of the Kenmore 625.38156 is its HEPA (High-Efficiency Particulate Air) filtration system. This technology is designed to capture 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, pet dander, and smoke. This level of filtration ensures that the air you breathe is significantly cleaner, which can be especially beneficial for allergy sufferers and those with respiratory issues.

Additionally, the Kenmore 625.38156 incorporates a multi-stage filtration process that includes a pre-filter designed to capture larger particles and extend the life of the HEPA filter. This allows users to enjoy improved air quality without the frequent and costly replacement of filters. The unit also features an activated carbon layer that effectively reduces odors from pets, cooking, and other common household sources, further enhancing the freshness of the air.

The air purifier is equipped with advanced fan technology, providing multiple speed settings and an overall quiet operation. This feature allows users to run the unit during the day or night without disrupting their routine or sleep. The energy-efficient design of the Kenmore 625.38156 also makes it an environmentally friendly option, consuming less power while delivering optimal performance.

Another significant characteristic of this air purifier is its user-friendly controls and digital display, which provide real-time feedback on air quality levels. With intuitive controls, users can easily adjust the settings to suit their preferences, ensuring custom air purification tailored to their needs.

Combined with its stylish aesthetics and compact form factor, the Kenmore 625.38156 offers an effective solution for improving indoor air quality. Whether for a small room or a spacious living area, this air purifier stands out as a reliable and efficient choice for anyone seeking to breathe easier at home.