Kenmore 625.38156 owner manual Tds

Page 22

Supply

water

pressure

limits

 

 

40-100 psi (280-689 kPa)

Supply

water

temperature

limits

 

.......................................................

40-100

°F (5-40°C)

Maximum

total

dissolved

solids

(TDS)

 

2000 ppm

Maximum

water

 

hardness

@ 6.9 pH

 

10 gpg

Maximum

iron,

manganese, hydrogen sulfide

 

0

Chlorine

in water

supply

(max.

ppm)

 

2.0

Supply water pH limits (pH)

 

 

 

4-10

Product

 

(quality)

 

water,

 

24 hours

 

_

14.53 gal. (55 liters)

Waste

water

per

gallon

of product

water

_

5 gal.

(18.9 liters)

Percent

rejection

 

of TDS,

minimum

(new

membraney

 

90-95

Automatic

shutoff

control

 

 

 

yes

Efficiency

2

.....................................................................................

 

 

 

 

 

 

 

9.7 %

Recovery

3

 

 

 

 

 

 

 

 

19.7 %

This system conforms to NSF/ANSI 58 for the specific performance claims as verified and substantiated by test data.

_@Feed water supply at 50 psi, 77°E and 750 TDS. Quality water production, amount of waste water and percent

rejection all vary with changes in pressure, temperature and total dissolved solids.

2Efficiency rating means the percentage of the influent water to the system that is available to the user as reverse

osmosis treated water under operating conditions that approximate typical daily usage.

3Recovery rating means the percentage of the influent water to the membrane portion of the system that is available to the user as reverse osmosis treated water when the system is operated without a storage tank or when the storage tank is bypassed.

Non-potable Water Sources: Do not attempt to use this product to make safe drinking water from non-potable water

sources. Do not use the system on microbiologically unsafe water, or water of unknown quality without an adequate disinfection before or after the system. This system is certified for cyst reduction and may be used on disinfected water that may contain filterable cysts.

Arsenic Reduction: This system shall only be used for arsenic reduction on chlorinated water supplies containing detectable residual free chlorine at the system inlet. Water systems using an inline chlorinator should provide a one minute chlorine contact time before the reverse osmosis system.

Nitrate/Nitrite Test Kit: This system is acceptable for treatment of influent concentrations of no more than 27mg/L

nitrate and 3mg/L nitrite in combination measured as N. It is certified for nitrate/nitrite reduction only for water sup-

plies with a pressure of 280 kPa (40 psig) or greater. This system is supplied with a nitrate/nitrite test kit. Product water should be monitored periodically according to the instructions provided with the test kit.

TDS Test Kits: TDS test kits are available by calling 1--800--949--8220, or check the water testing section of your local phone directory:

Installations In The Commonwealth Of Massachusetts: The Commonwealth of Massachusetts requires installation be performed by a licensed plumber and do not permit the use of saddle valves. Plumbing code 248--CMR of the

Commonwealth of Massachusetts must be followed in these cases.

Product Water Testing: The Reverse Osmosis System contains a replaceable treatment component critical for the effective reduction of total dissolved solids. Product water should be tested periodically to verify that the system is performing properly:

Replacement of the reverse osmosis component: This reverse osmosis system contains a replaceable component critical to the efficiency of the system. Replacement of the reverse osmosis component should be with one of identical

specifications, as defined by the manufacturer, to assure the same efficiency and contaminant performance.

Questions? Call The Kenmore Water Line 1-800-426-9345or visit KenmoreWater.com

22

Image 22
Contents Osmosis ONE Year Full Warranty on Reverse Osmosis System Osmosis Inspect Shipment Remote Location Plan Your InstallationUnder the Sink Location Check Space RequirementsTypical Under Sink Installation Prepare Site for Installation OverviewChoose Type of Water Fitting to Install Install Saddle ValveUnder The Sink Installation IntroductionRemote Location Install Reverse Osmosis Filter Assembly Install Storage TankInstall Reverse Osmosis Faucet Select Location of Reverse Osmosis Faucet Mounting HoleInstall Battery Faucet ElectronicsHOW to CUT and Connect the Tubes Remove and Discard Foam PlugsConnect RED Tube to Reverse Osmosis Faucet OsmosisSanitize the System Pressure Test the System Purging the SystemHOW Your Reverse Osmosis System Works Membrane RO Membrane Cartridge Maintenance PREFILTER/POSTFILTER MaintenancePREFILTER/POSTFILTER Cartridge Replacement Flow Control Change BatteryChange Collet and O-RING TDS Page Cause Postfitterexpended Iiiii!!!i!iii!i i!i Iii!i!iii!i 110 Description Iiiiiiiiiiiiiiiiiiii

625.38156 specifications

The Kenmore 625.38156 is a highly regarded air purifier known for its efficient performance and reliable functionality, making it a popular choice among consumers seeking improved indoor air quality. It boasts a sleek, modern design that fits well into a variety of home environments, from living rooms to bedrooms.

One of the standout features of the Kenmore 625.38156 is its HEPA (High-Efficiency Particulate Air) filtration system. This technology is designed to capture 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, pet dander, and smoke. This level of filtration ensures that the air you breathe is significantly cleaner, which can be especially beneficial for allergy sufferers and those with respiratory issues.

Additionally, the Kenmore 625.38156 incorporates a multi-stage filtration process that includes a pre-filter designed to capture larger particles and extend the life of the HEPA filter. This allows users to enjoy improved air quality without the frequent and costly replacement of filters. The unit also features an activated carbon layer that effectively reduces odors from pets, cooking, and other common household sources, further enhancing the freshness of the air.

The air purifier is equipped with advanced fan technology, providing multiple speed settings and an overall quiet operation. This feature allows users to run the unit during the day or night without disrupting their routine or sleep. The energy-efficient design of the Kenmore 625.38156 also makes it an environmentally friendly option, consuming less power while delivering optimal performance.

Another significant characteristic of this air purifier is its user-friendly controls and digital display, which provide real-time feedback on air quality levels. With intuitive controls, users can easily adjust the settings to suit their preferences, ensuring custom air purification tailored to their needs.

Combined with its stylish aesthetics and compact form factor, the Kenmore 625.38156 offers an effective solution for improving indoor air quality. Whether for a small room or a spacious living area, this air purifier stands out as a reliable and efficient choice for anyone seeking to breathe easier at home.