Choose Type of Water Fitting to Install

CHOOSE TYPE OF WATER FITTING TO INSTALL

Locate the cold water line in the sink cabinet. It is recom- mended, but not required, that the cold water line be soft water. You can use the saddle valve provided with your unit to tap into the cold water line. See Fig. 5. Or you can purchase standard pipe fittings locally such as a com- pression fitting. The fitting must provide a leak-tight connection to the Reverse Osmosis 1/4" tube.

NOTE: Local code may dictate which type of water fit- ting is used. Consult a plumber if you are not familiar with local codes or plumbing procedures.

NOTE: Codes in the state of Massachusetts require

installation by a licensed plumber and do not permit the use of saddle valves.

If you live in the state of Massachusetts, review plumb-

ing code 248-CMR of the Commonwealth of

Massachusetts before proceeding with the installation.

INSTALL SADDLE VALVE

(Included with your package)

6.Do not connect the tubing to the fitting at this time. This will occur later in the installation.

NOTE: Once the saddle valve is installed, the nut near

the handle may need to be tightened to prevent possi- ble leaks.

This fitting will be installed on the cold water pipe. The fitting must provide a leak-tight connection to the Reverse Osmosis 1/4" tubing.

Complete the following steps to install the saddle valve assembly.

. Review Fig. 5 and familiarize yourself with all parts of the saddle valve. This valve will self-tap a hole in cop- per tubing or plastic pipe.

IMPORTANT'. Before starting, close the hot and cold water shutoff valves (See Figure 5).

2.if installing on iron pipe, drill a 1/8" hole for the pierc- ing pin.

IMPORTANT'. if a battery-powered hand drill is not available and an electric drill is used, ensure that the

drill is properly grounded.

Hot Water	Cold Water
Shutoff Valve	Shutoff Valve

Pre-Drill

1/8" Hole

(Iron Pipe)

Seal

Valve

Nut - tighten if necessary

. Place the seal on the inside of Clamp X. See Fig. 5. Turn the valve handle all the way out.(counter-clock- wise) Be sure the piercing pin does not stick out beyond the seal.

4. Place Clamp X and Z around the pipe. Secure in place

with two screws. Tighten both screws evenly. Do not

Clamp Z

(Plastic)

Insert

Handle

over tighten screws. See Fig. 5.

5. Turn the valve handle all the way in. (clockwise) This

will pierce the wall of the pipe. See Fig. 5.

Nut	Use to Connect

Tubing

Saddle Valve Connection

(Included in package)

Figure 5

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

625.38156 specifications

The Kenmore 625.38156 is a highly regarded air purifier known for its efficient performance and reliable functionality, making it a popular choice among consumers seeking improved indoor air quality. It boasts a sleek, modern design that fits well into a variety of home environments, from living rooms to bedrooms.

One of the standout features of the Kenmore 625.38156 is its HEPA (High-Efficiency Particulate Air) filtration system. This technology is designed to capture 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, pet dander, and smoke. This level of filtration ensures that the air you breathe is significantly cleaner, which can be especially beneficial for allergy sufferers and those with respiratory issues.

Additionally, the Kenmore 625.38156 incorporates a multi-stage filtration process that includes a pre-filter designed to capture larger particles and extend the life of the HEPA filter. This allows users to enjoy improved air quality without the frequent and costly replacement of filters. The unit also features an activated carbon layer that effectively reduces odors from pets, cooking, and other common household sources, further enhancing the freshness of the air.

The air purifier is equipped with advanced fan technology, providing multiple speed settings and an overall quiet operation. This feature allows users to run the unit during the day or night without disrupting their routine or sleep. The energy-efficient design of the Kenmore 625.38156 also makes it an environmentally friendly option, consuming less power while delivering optimal performance.

Another significant characteristic of this air purifier is its user-friendly controls and digital display, which provide real-time feedback on air quality levels. With intuitive controls, users can easily adjust the settings to suit their preferences, ensuring custom air purification tailored to their needs.

Combined with its stylish aesthetics and compact form factor, the Kenmore 625.38156 offers an effective solution for improving indoor air quality. Whether for a small room or a spacious living area, this air purifier stands out as a reliable and efficient choice for anyone seeking to breathe easier at home.