Kenmore 625.384650 owner manual Replacement

Page 9

 

 

 

 

FILTER CARTRIDGE

REPLACEMENT

 

 

CAUTION:

Never

remove

sumps with water pres-

to relieve

pressure

in the

system.

sure in the filter system.

 

 

 

2. Turn the sump off of the filter head, to the left or

 

 

 

 

 

 

 

1. Close

the

water

supply

shut-off

valve

(FIG. 1,

clockwise

1/4 turn.

Be careful,

the sump is full of wa-

page 4)

to the filter.

Open

the filtered

water

faucet

ter. Do not

lose the

large

o-ring

seal.

FIG. 6

ca_ridge

S

o-ring

seal

TURN

SUMP

CLOCKWISE

TO REMOVE

Filter I

3.Be sure the inside of the sump is clean. Use hot, soapy water and rinse thoroughly.

4.Remove the wrapper from the new filter cartridge

and insert the filter cartridge in the sump. Be sure the

two o-rings are towards the filter head.

Note: If you are installing two different types of filter

cartridges, be sure to install in filters I and II as the

guideline on page 3 shows.

5.Lightly lubricate the o- ring seal in the sump with silicone grease or Vaseline. Be sure it is fully seated in its groove.

6.Hold the sump up to the filter head aligning the

protrusion on the cartridge with the center hole in the bottom of the head.

Note: If the sump will not tighten up to the head you may have the cartridge in upside down. Take the car- tridge out and check for correct orientation.

7. Turn (counterclockwise) the sump onto the filter head 1/4 turn.

8.Repeat steps 2 through 7 at the other filter.

head

TURN

SUMP

COUNTER-

CLOCKWISE

TO TIGHTEN

Filter II

9. Open the filtered water faucet. Then, slowly open

the water supply valve and allow the filter housing to fill.

10.Close the filtered water faucet. Check for leaks be- tween the sump and the head.

11.Remove and replace batteries to reset counter and timer.

Note: If leaking, turn off the water supply and open

the filtered water faucet to depressurize the filter.

Then disassemble the filter and check the o-ring for cuts, flat spots, etc., and sealing surfaces for foreign material. Clean the o-ring and lubricate with silicone grease or Vaseline. Carefully press the o- ring into the groove in the sump.

12.Taste and Odor Cartridges: A taste and odor car-

tridge contains activated carbon, a black powder. When new, open the filtered water faucet and allow

fine, harmless carbon particles to purge from the car- tridge. Close the faucet when you no longer see the

"fines" in the filtered water, or approximately 2-3 minutes.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Deluxe DUAL-STAGE Drinking Water System Water that is microbiologically unsafe or of un WarrantyMay be used MayContents Typical Undersink Installation Parts of the SystemMaterials and Tools Needed Installation Steps Water Supply FittingOptional Pipe Fittings Assemble Install Faucet Make Hole for Filtered Water FaucetFaucet, FIG Make Tubing Connections Connection, aUnder Using the System Filter Cartridge / Useful Life / ReplacementFaucet Electronics Replacement Repair Parts Description NO. Number Repair Parts ListSears

625.384650 specifications

The Kenmore 625.384650 is a highly efficient and versatile air purifier designed to enhance indoor air quality in various settings. With its sleek design and powerful performance, it effectively tackles common pollutants, allergens, and unpleasant odors, making it an ideal choice for homes, offices, or any enclosed spaces.

One of the standout features of the Kenmore 625.384650 is its multi-stage filtration system. This system includes a pre-filter, a true HEPA filter, and an activated carbon filter. The pre-filter captures large particles such as dust and pet hair, while the true HEPA filter is capable of trapping 99.97% of airborne pollutants, including pollen, mold spores, and smoke particles as small as 0.3 microns. The activated carbon filter effectively absorbs odors and harmful gases, ensuring that the air remains fresh and clean.

The air purifier is equipped with a robust CADR (Clean Air Delivery Rate) that signifies its effectiveness in removing smoke, dust, and pollen from the air. The CADR ratings not only reflect the speed and efficiency with which the unit cleans the air but also help consumers determine the appropriate size of the air purifier for their needs. The Kenmore 625.384650 is suitable for medium to large rooms, making it a versatile option for various spaces.

For enhanced user convenience, the Kenmore 625.384650 features an intuitive control panel with various settings, including multiple fan speeds, a timer function, and filter replacement indicators. The quiet operation of the air purifier allows it to function efficiently while minimizing noise disruption, making it suitable for use during the day or night.

Additionally, the Kenmore 625.384650 is designed with energy efficiency in mind. It is ENERGY STAR certified, ensuring that it consumes minimal electricity while delivering optimal performance. This characteristic makes it an environmentally friendly option for consumers seeking to maintain indoor air quality without significantly increasing energy costs.

Overall, the Kenmore 625.384650 is a well-rounded air purifier that combines advanced filtration technologies, user-friendly features, and energy efficiency. Its robust design and effective performance make it a popular choice for anyone looking to improve the air quality in their living or working environment.
Top Page Image Contents