Kenmore 625.347001 owner manual Install Storage TANK, Make Remaining Tubing Connections

Page 8

--STEP 5: INSTALL STORAGE TANK, MAKE REMAINING TUBING CONNECTIONS --

1.CONNECT DRAIN TUBING, FAUCET TO DRAIN ADAPTER: Referring to FIG. 8, run the loose section (connected to faucet barb fitting) of black 3/8”tubing from the faucet to the drain adapter,with a black collet, installed on page 6. Cut this tubing as needed to route in as straight of a run as possible, without loops, dips, low spots or kinks. Cut the end of the tubing square. Then, push all the way into the fitting. Pull on the tubing to be sure it’s held firmly in the adapter fitting. See pages 12 and 13 for tubing connection instructions.

2.CONNECT TUBING TO WATER SUPPLY: Use the tubing insert, ferrule and nut to fasten the 1/4”green tubing to the saddle valve fitting installed on page 5.

Tighten the nut with a wrench.

3.Move the storage tank into place next to the RO as- sembly. You can stand the tank upright, or lay it on side. Apply no more than 2 wraps of Teflon tape to the threads on the nipple at the top of the tank. Hand tighten, then wrench 1/4 turn only, the other in- cluded tubing adapter fitting with the yellow collet onto the tank nipple. BE CAREFUL NOT TO CROSS THREAD.

4.Run the 3/8” yellow tubing to the fitting installed in step 3. Be sure the end of the tubing is cut square, and insert all the way into the fitting. Again, pull on the tubing to be sure it’s held firmly in the fitting.

FIG. 8

TYPICAL UNDERSINK INSTALLATION

RO product water faucet

 

 

 

 

3/8”black tubing, to

 

 

 

 

larger barb on faucet

See note on

 

 

 

 

codes in the state

 

 

 

 

of Massachusetts,

 

 

drain adapter

 

page 5.

 

 

 

 

water supply

HOT

COLD

 

 

valve

 

Note: See note on page 4

 

 

sink p---trap

 

 

 

regarding tubing lengths.

 

 

 

 

OPEN

 

 

 

 

CLOSE

insert ferrule

nut

yellow collet

tubing adaptor

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Reverse Osmosis Drinking Water System Warranty Safety GuidesWhat Your Reverse Osmosis System will do Table of ContentsBefore YOU Begin to Install the RO System Tools and Materials Needed Where to Install the RO SystemSteps to Install Optional Pipe Fittings compression type shown Install Cold Water Supply Saddle ValveSaddle Valve Prepare Mounting Hole Install Drain AdapterInstall Faucet Install RO Assembly Assemble FaucetInstall Storage TANK, Make Remaining Tubing Connections Typical Undersink InstallationSANITIZING, Pressure Testing & Purging 7, only replace all cartridgesHOW Your Reverse Osmosis System Works RO Membrane Cartridge Care of Your Reverse Osmosis SystemPrefilter and Postfilter Cartridges To clean/replace flow control and screen FIG Flow Control and ScreenTubing Connection Connection FIGAutomatic Shutoff Service Changing Collet and O-ring FIGReverse Osmosis System Care Guide Dimensions and Specifications Repair Parts Kenmore Reverse Osmosis Drinking Water System, Model NoKey Part Description of Part Number Remote RO Installation Remote Location for Reverse Osmosis SystemPage OWNER’S Manual Model no

625.347001 specifications

The Kenmore 625.347001 is a versatile and efficient appliance that combines advanced technology with user-friendly features, making it an ideal choice for modern households. Renowned for its reliability and performance, this model boasts several characteristics that enhance its functionality and convenience.

One of the standout features of the Kenmore 625.347001 is its innovative filtration system, designed to ensure maximum air quality and odor control. The model utilizes a HEPA filter that captures even the finest particles, making it excellent for allergy sufferers. Additionally, the filter is washable, which not only makes it cost-effective but also eco-friendly, as it reduces waste.

Powerful suction is another hallmark of the Kenmore 625.347001. With its robust motor, it is capable of tackling various surfaces, from carpets to hardwood floors, efficiently. Users can adjust the suction power according to their cleaning needs, thanks to its variable suction control feature. This adaptability ensures that delicate surfaces are treated gently without compromising cleaning performance on tougher areas.

The Kenmore 625.347001 is designed for ease of use and convenience. It features an ergonomic handle and lightweight design, allowing for effortless maneuverability around the home. Its long power cord enhances reach, minimizing the need for frequent plug changes, which can disrupt the cleaning process. Furthermore, the quick-release tool caddy conveniently stores and allows easy access to a variety of attachments, such as a dusting brush, crevice tool, and upholstery nozzle.

Durability is another significant aspect of the Kenmore 625.347001. Constructed from high-quality materials, this model is built to withstand daily use, ensuring longevity and reliability. The dustbin is designed for easy emptying and cleaning, reducing maintenance time and enhancing user experience.

In terms of design, the Kenmore 625.347001 sports a sleek and modern aesthetic that fits seamlessly into any home decor. Its compact design allows for easy storage, catering to those with limited space.

Overall, the Kenmore 625.347001 stands out as a premium cleaning appliance, expertly combining efficiency, convenience, and durability, making it a valuable addition to any household.
Top Page Image Contents