![](/images/new-backgrounds/1040844/4084411x1.webp)
6. PLUMBING
1.Plumbing connections are similar to a traditional "tank cross" or "tank tee". Provisions are made for popular line sizes via a
EXPLOSION HAZARD. Failure to follow these instructions can cause a rupture or explosion possibly causing serious or fatal injury, flooding, and/or property damage.
2.Install the supply piping from the well pump. If required, install a
3.Install a shutoff (service) valve on the outgoing line. This will allow the
NOTE: The relief valve is sized for a maximum flow rate of 10 gpm at 125 psi. If the pump installation allows higher flow rates, an additional relief valve must be installed.
WATER CONNECTIONS
CHECK VALVE
6