Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
show radius
show radius
To display information about the RADIUS servers that are configured in the system, use the show radius command in EXEC mode.
show radius
Syntax Description This command has no arguments or keywords.
Defaults | If no radius servers are configured, no output is displayed. |
Command Modes
Command History
EXEC
Release | Modification |
Release 3.3.0 | This command was introduced on the Cisco |
| Cisco XR 12000 Series Router. |
|
|
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the show radius command to display statistics for each configured RADIUS server.
Task ID |
| Task ID | Operations |
|
| aaa | read |
|
|
| |
|
| The following sample output is for the show radius command: | |
Examples |
| ||
|
| RP/0/RP0/CPU0:router# show radius | |
|
| Global dead time: 0 minute(s) | |
Server: 1.1.1.1/1/2 is UP Timeout: 5 sec, Retransmit limit: 3 Authentication:
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Accounting:
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
0 bad authenticators, 0 unknown types, 0 dropped
0 ms latest rtt
Cisco IOS XR System Security Command Reference