Cisco Systems XR manual Show radius dead-criteria, SR-68

Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software

show radius dead-criteria

show radius dead-criteria

To obtain information about the dead server detection criteria, use the show radius dead-criteriacommand in EXEC mode.

show radius dead-criteria host ip-addr[auth-port auth-port][acct-port acct-port]

Syntax Description	host ip-addr	Specifies the name or IP address of the configured RADIUS server.
	auth-port auth-port	(Optional) Specifies the authentication port for the RADIUS server. The
		default value is 1645.
	acct-port acct-port	(Optional) Specifies the accounting port for the RADIUS server. The
		default value is 1646.
Defaults	The default values for time and tries are not fixed to a single value; therefore, they are calculated and fall
	within a range of 10 to 60 seconds for time and 10 to 100 for tries.

Command Modes

Command History

EXEC

Release	Modification
Release 3.3.0	This command was introduced on the Cisco CRS-1 and
	Cisco XR 12000 Series Router.

Usage Guidelines		To use this command, you must be in a user group associated with a task group that includes the proper
		task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
		Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Task ID		Task ID	Operations
		aaa	read
		The following sample output is for the show radius dead-criteriacommand:
Examples
		RP/0/RP0/CPU0:router# show radius dead-criteria host 12.26.49.12 auth-port 11000 acct-port
	11001

Server: 12.26.49.12/11000/11001

Dead criteria time: 10 sec (computed) tries: 10 (computed)

Cisco IOS XR System Security Command Reference

SR-68