3 CM2/D Dimensions, Approximate Weight

ChannelMag Section 2 Installation

2.4.3 CM2/D

Dimensions and

Approximate Weight

The CM2/D is normally used with a FMX167 hydrostatic level transducer and installed as shown below. A 2-part re-enterable gel type 4442, manufactured by 3M Company, St. Paul, Minnesota, is normally supplied to retain the CM2/D in the hole made for it. The 2-part gel is mixed together in equal amounts. It makes approximately 1 gallon

(4.5 liters) of gel, which should sufﬁce for the installation of CM2/D.

The hydrostatic level transducer must be installed in a stilling well as shown, such that the level is not affected by the impact pressure of the ﬂowing media. The hydrostatic pressure transducer may be installed with its bottom most end above any silt build-up at the bottom of the channel by a suggested maximum of 0.5” (10mm). The FMX167 ha a sealed sensing diaphragm.

Similarly to the FMX167, the CM2/D mean velocity sensor may be installed to protrude above the bottom of the channel by a suggested maximum of 0.5” (10mm), as shown in the diagram below.

The CM2/8”, 24” and 40” ChannelMag sensors are normally supplied with mounting brackets at each side. The mounting brackets are placed over two clearance slots cut into the Magnetic Enhancement Plates. Base plates with ﬁxing screws, countersunk from the bottom side are then used to secure the CM2 ChannelMag to the Magnetic Enhancement Plates. The clearance slots allow the Magnetic Enhancements Plates to be adjusted symmetrically about the exact width of the channel. The width must be adjusted and secured before installing the ChannelMag into the channel.

Note

For CM2 ChannelMags supplied without ramps, the CM2 must be placed in a recess that must be made in the bed of the channel. The recess depth must be such that the upper surface of the ChannelMag is not higher than a suggested ½”” (12mm) above the bed of the channel, but enough

to avoid excessive silt or similar build-up. If higher than this is necessary, then the

Channelmag specifications

Arkon Channelmag is a dynamic digital platform designed to streamline content dissemination and enhance communication among businesses, consumers, and content producers. As a cutting-edge solution, it tailors its features to meet the diverse needs of modern audiences, emphasizing engagement, accessibility, and user-friendliness.

At its core, Arkon Channelmag utilizes a robust content management system (CMS) that allows users to create, edit, and manage digital content effortlessly. The CMS supports a variety of media formats, including text, images, videos, and interactive elements, providing a comprehensive toolkit for content creators. This versatility enables businesses to produce visually appealing and informative content that captures the attention of their target audience.

One of the standout features of Arkon Channelmag is its integration of artificial intelligence (AI) and machine learning algorithms. These technologies analyze user behavior and engagement patterns, allowing for personalized content recommendations that enhance user experience. This tailored approach not only keeps users engaged but also drives traffic to businesses by presenting them with relevant content that aligns with their interests.

Another key characteristic of Arkon Channelmag is its responsive design, which ensures that content is accessible across all devices, from desktops to smartphones. The platform’s mobile optimization is essential in today’s digital landscape, where users expect seamless experiences regardless of the device they are using. This adaptability allows businesses to reach a wider audience and fosters higher engagement rates.

The platform also prioritizes collaboration by allowing multiple users to work on content simultaneously. This feature facilitates teamwork and accelerates the content creation process, crucial for businesses aiming to stay ahead in a competitive market. Furthermore, the built-in analytics tools provide insightful metrics on content performance, enabling users to make data-driven decisions and refine their strategies accordingly.

Security is another hallmark of Arkon Channelmag, with advanced encryption protocols and compliance with data protection regulations ensuring that user data is safeguarded. This commitment to security fosters trust among users, making Arkon Channelmag a credible choice for businesses that prioritize privacy and data integrity.

In summary, Arkon Channelmag stands out in the digital landscape through its rich features, innovative technologies, and user-centric design. By focusing on content management, personalization, collaboration, and security, it equips businesses with the tools they need to thrive in a rapidly evolving digital environment.