Arkon Channelmag instruction manual Signal Or Indication Swing

Page 24

ChannelMag Section 4 Maintenance

4.6Transmitter Fault

4.7All Checks Good, But No Signal

4.8Erratic Signal

Should the resistances referenced above be correct, but the zero and span cannot be achieved, then the fault lies with the transmitter.

Check wiring in transmitter terminals in accordance with the transmitter instructions. Make sure there is actually flow through the channel.

Check the following:

a)Make sure the ChannelMag sensor is fully covered with media.

b)Check Paragraphs 4.1.4 to 4.1.6

c)Check if the ChannelMag sensor is correctly grounded (see Section 2.5)

d)Check for loose wiring.

e)Make sure cables are not too long. For multiple ChannelMag systems make sure electrode cables are separated from other cables (see Section 2.7)

f)The ChannelMag has high insensitivity to radios and variable frequency drives. If these are in close proximity to the transmitter or sensor then cable lengths should be kept to an absolute minimum.

4.9Signal Or Indication “Swing”

Check the following:

a)Make sure there is enough straight length of channel (see Section 2.3). If the requisite straight lengths are not available, then the “damping” in the transmitter must be maximized (see transmitter Instruction Manual).

b)Make sure there are no flow pipes or channels entering the channel in the location of the ChannelMag sensor .

c)Make sure there is no debris or loose cables in the vicinity of the electrodes.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Channelmag Flowmeters Foreword Important Please Read ChannelMag Recommended Spares Introduction Scope ChannelMag CM2Scope ChannelMag PM2 Safety Media Considerations Location and MountingChannelMag Installation Installation, Dimensions and Approx. Weights 1 CM2 Sensors Important NoteChannelMag Installation Installation of 2 x CM2 ChannelMag Sensors 3 CM2/D Dimensions Approximate Weight4 PM2 Sensors in Full Pipes 5 PM2 Sensors in Non-Full Pipes Installation of PM2 Sensors With Magnetic Enhancement Band ChannelMag PM2 Weights Dimensions Grounding ChannelMag PM2 Enhancement Plate Expander MechanismCable Types ChannelMag Junction Box Wiring Diagram ChannelMag Entela Approval Cable Runs From The Junction Box Calibration and Range Factors Cleaning Zero Span Checking Effect of Moisture IngressionSignal Or Indication Swing Recommended Spares

Channelmag specifications

Arkon Channelmag is a dynamic digital platform designed to streamline content dissemination and enhance communication among businesses, consumers, and content producers. As a cutting-edge solution, it tailors its features to meet the diverse needs of modern audiences, emphasizing engagement, accessibility, and user-friendliness.

At its core, Arkon Channelmag utilizes a robust content management system (CMS) that allows users to create, edit, and manage digital content effortlessly. The CMS supports a variety of media formats, including text, images, videos, and interactive elements, providing a comprehensive toolkit for content creators. This versatility enables businesses to produce visually appealing and informative content that captures the attention of their target audience.

One of the standout features of Arkon Channelmag is its integration of artificial intelligence (AI) and machine learning algorithms. These technologies analyze user behavior and engagement patterns, allowing for personalized content recommendations that enhance user experience. This tailored approach not only keeps users engaged but also drives traffic to businesses by presenting them with relevant content that aligns with their interests.

Another key characteristic of Arkon Channelmag is its responsive design, which ensures that content is accessible across all devices, from desktops to smartphones. The platform’s mobile optimization is essential in today’s digital landscape, where users expect seamless experiences regardless of the device they are using. This adaptability allows businesses to reach a wider audience and fosters higher engagement rates.

The platform also prioritizes collaboration by allowing multiple users to work on content simultaneously. This feature facilitates teamwork and accelerates the content creation process, crucial for businesses aiming to stay ahead in a competitive market. Furthermore, the built-in analytics tools provide insightful metrics on content performance, enabling users to make data-driven decisions and refine their strategies accordingly.

Security is another hallmark of Arkon Channelmag, with advanced encryption protocols and compliance with data protection regulations ensuring that user data is safeguarded. This commitment to security fosters trust among users, making Arkon Channelmag a credible choice for businesses that prioritize privacy and data integrity.

In summary, Arkon Channelmag stands out in the digital landscape through its rich features, innovative technologies, and user-centric design. By focusing on content management, personalization, collaboration, and security, it equips businesses with the tools they need to thrive in a rapidly evolving digital environment.
Top Page Image Contents