Arkon Channelmag instruction manual Scope ChannelMag PM2

Page 7

Chanel Mag

Section I Introduccion

1.2Scope: ChannelMag PM2

The ChannelMag PM2 Series is suitable for full or partially full pipes from 20” to 120” (500 - 3000 mm). They meet or exceed the requirements of ISO 9213 and are calibrated in a long open tank, believed to be the largest NIST traceable facility available. ChannelMags are calibrated in accordance with ISO approved methods. Each ChannelMag system is normally supplied with a NIST traceable Calibration Certificate.

Magnetic enhancement plates are fixed to and calibrated with the ChannelMag sensor(s). The enhancement plates are custom made to the required diameter of the channel. Their purpose is to determine the distribution pattern of magnetic flux on calibration in ARKON test laboratory and to insure it is the same as the distribution on-site. In this way, the test calibration is the same as on- site. The other function of the enhancement plates is to retain the ChannelMag sensors in place in the pipe. They incorporate an expander mechanism which holds the sensor(s) firmly in place, without the need of further fixtures or to cut holes in the pipe.

ChannelMag sensors generate a uniquely powerful magnetic field over the whole cross sectional area of the pipe. They operate using Faraday’s Law, where a conductor moving in a magnetic field induces a voltage, the amplitude of which is proportional to the velocity of the conductor. The conductor is the media being measured. Large conical electrodes on the PM2 sensor measure the voltage signal, which is the mean velocity “weighted” to account for the complete cross sectional velocity profile. The signal is unaffected by media viscosity or density.

Volumetric flow in partially filled pipes is computed in the 4411e by multiplying level x mean velocity. The level signal is linearized in the 4411e. Level is measured normally by a high resolution pressure transducer, which is used under the ramps of the ChannelMag velocity sensor. This has the advantage of being supplied with the PM2 sensor as a single unit, as well as being virtually insensitive to froth on the surface of the media. However, an ultrasonic level transducer is available, which must be mounted in a suitable manhole.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Channelmag Flowmeters Foreword Important Please Read ChannelMag Recommended Spares Scope ChannelMag CM2 IntroductionScope ChannelMag PM2 Safety Location and Mounting Media ConsiderationsChannelMag Installation Important Note Installation, Dimensions and Approx. Weights 1 CM2 SensorsChannelMag Installation Installation of 2 x CM2 ChannelMag Sensors Approximate Weight 3 CM2/D Dimensions4 PM2 Sensors in Full Pipes 5 PM2 Sensors in Non-Full Pipes Installation of PM2 Sensors With Magnetic Enhancement Band ChannelMag PM2 Enhancement Plate Expander Mechanism ChannelMag PM2 Weights Dimensions GroundingCable Types ChannelMag Junction Box Wiring Diagram ChannelMag Entela Approval Cable Runs From The Junction Box Calibration and Range Factors Effect of Moisture Ingression Cleaning Zero Span CheckingSignal Or Indication Swing Recommended Spares

Channelmag specifications

Arkon Channelmag is a dynamic digital platform designed to streamline content dissemination and enhance communication among businesses, consumers, and content producers. As a cutting-edge solution, it tailors its features to meet the diverse needs of modern audiences, emphasizing engagement, accessibility, and user-friendliness.

At its core, Arkon Channelmag utilizes a robust content management system (CMS) that allows users to create, edit, and manage digital content effortlessly. The CMS supports a variety of media formats, including text, images, videos, and interactive elements, providing a comprehensive toolkit for content creators. This versatility enables businesses to produce visually appealing and informative content that captures the attention of their target audience.

One of the standout features of Arkon Channelmag is its integration of artificial intelligence (AI) and machine learning algorithms. These technologies analyze user behavior and engagement patterns, allowing for personalized content recommendations that enhance user experience. This tailored approach not only keeps users engaged but also drives traffic to businesses by presenting them with relevant content that aligns with their interests.

Another key characteristic of Arkon Channelmag is its responsive design, which ensures that content is accessible across all devices, from desktops to smartphones. The platform’s mobile optimization is essential in today’s digital landscape, where users expect seamless experiences regardless of the device they are using. This adaptability allows businesses to reach a wider audience and fosters higher engagement rates.

The platform also prioritizes collaboration by allowing multiple users to work on content simultaneously. This feature facilitates teamwork and accelerates the content creation process, crucial for businesses aiming to stay ahead in a competitive market. Furthermore, the built-in analytics tools provide insightful metrics on content performance, enabling users to make data-driven decisions and refine their strategies accordingly.

Security is another hallmark of Arkon Channelmag, with advanced encryption protocols and compliance with data protection regulations ensuring that user data is safeguarded. This commitment to security fosters trust among users, making Arkon Channelmag a credible choice for businesses that prioritize privacy and data integrity.

In summary, Arkon Channelmag stands out in the digital landscape through its rich features, innovative technologies, and user-centric design. By focusing on content management, personalization, collaboration, and security, it equips businesses with the tools they need to thrive in a rapidly evolving digital environment.
Top Page Image Contents