Argosy Research H200HF Series, H200 Series H200 Physical Specifications, H200 Capacity Ratings

H200 Physical Specifications

Mineral tank sizes shown are with polyglass tanks.

			RECOMMENDED BRINE TANK		APPROXIMATE
	PIPE SIZE	MINERAL TANK	SIZE	SALT STORAGE	SHIPPING WEIGHT-TOP MOUNT
MODEL	(INCHES)	(INCHES)	(INCHES)	( LBS)	SINGLE	TWIN
H200-240	2	24 X 72	24 X 50	715	674	1325
H200-300-24	2	24 X 72	24 X 50	715	776	1529
H200-300-30	2	30 X 72	30 X 50	1,110	1059	2064
H200-450-30	2	30 X 72	39 X 48	2,030	1333	2593
H200-450-36	2	36 X 72	39 X 48	2,030	1393	2653
H200-600	2	36 X 72	39 X 48	1,640	1751	3426
H200-750	2	42 X 72	42 X 60	2,580	2535	4954
H200-900	2	42 X 72	50 X 60	4,130	2922	5750
H200-1200	2	48 X 72	50 X 60	4,130	3600	6900

H200 Capacity Ratings

	RESIN		RATED CAPACITY		FLOW RATES (gpm)		BKW
		LOW SALT	MEDIUM SALT	HIGH SALT
MODEL	CU.FT.	GRAINS/LBS	GRAINS/LBS	GRAINS/LBS	15 PSI	25 PSI	GPM
H200-240	8	152,000/48	224,000/80	256,000/120	77	100	12
H200-300-24	10	190,000/60	280,000/100	320,000/150	75	97	12
H200-300-30	10	190,000/60	280,000/100	320,000/150	92	120	20
H200-450-30	15	285,000/90	420,000/150	480,000/225	88	113	20
H200-450-36	15	285,000/90	420,000/150	480,000/225	100	130	30
H200-600	20	380,000/120	560,000/200	640,000/300	97	126	30
H200-750	25	475,000/150	700,000/250	800,000/375	106	137	40
H200-900	30	570,000/180	840,000/300	960,000/450	104	130	40
H200-1200	40	760,000/240	1,120,000/400	1,280,000/600	105	135	50

1. Steel tank design configurations available up through 60” tank diameters. Consult factory for details.

OPERATING CONDITIONS

1.Water Pressure 30 - 100 psi.

2.Water temperature is not to exceed 110°F and the unit cannot be subject to freezing conditions. Consult factory for higher water temperature applications.

3.Limit of 2 ppm of Ferrous Iron. Add 3 grains per gallon of hardness for each ppm of iron present.

4.Flex connectors and vacuum breakers are required when using the PolyGlass Composite mineral tanks.

5.Backwash flow rates are calculated at 4 gpm per sq. ft. of bed area and rounded off based on 50ºF water temperature.

H200 Series Top Mount Dimensions

MODEL	SYSTEM	OUTLET	INLET	DRAIN	MINERAL	BRINE
	HEIGHT	HEIGHTS	HEIGHTS	HEIGHTS	TANK	TANK
H200-300	89.4	86.7	83.1	85.4	24x72	24x50
H200-300-30	86.2	83.5	79.9	82.2	30x72	30x50
H200-450	86.2	83.5	79.9	82.2	30x72	39x48
H200-600	87.2	84.5	80.9	83.2	36x72	39x48
H200-750	104.5	101.8	98.2	100.5	42x72	42x60
H200-900	104.5	101.8	98.2	100.5	42x72	50x60
H200-1200	104.5	101.8	98.2	100.5	48x72	50x60

H200 Series Side Mount Dimensions

MODEL	SYSTEM	OUTLET	INLET	DRAIN	MINERAL	BRINE
	HEIGHT	HEIGHTS	HEIGHTS	HEIGHTS	TANK	TANK
H200-300-SM	95.6	54.6	51	53.3	24x72	24x50
H200-300-30-SM	94.6	54.6	51	53.3	30x72	30x50
H200-450-SM	94.6	54.6	51	53.3	30x72	39x48
H200-600-SM	95.3	54.6	51	53.3	36x72	39x48
H200-750-SM	100.9	54.6	51	53.3	42x72	42x60
H200-900-SM	100.9	54.6	51	53.3	42x72	50x60
H200-1200-SM	100.9	54.6	51	53.3	48x72	50x60

All dimensions ±2” and are subject to change without notice. Use as reference only. Call factory for optional tank & dimensional configurations.

Product Improvement designs are subject to change without notice.

HELLENBRAND, INC.

404 MORAVIAN VALLEY ROAD WAUNAKEE, WISCONSIN 53597 (608) 849-3050 • FAX (608) 849-7398

www.hellenbrand.com

12