H200HF Physical Specifications

Mineral tank sizes shown are with polyglass tanks.

					APPROXIMATE
	PIPE SIZE	MINERAL TANK	SIZE	SALT STORAGE	SHIPPING WEIGHT
MODEL	(INCHES)	(INCHES)	(INCHES)	( LBS)	SINGLE	TWIN
H200HF-300-24-3	3	24 X 72	30 X 50	1,110	1,200	2,300
H200HF-300-30-3	3	30 X 72	30 X 50	1,110	1,400	2,700
H200HF-450-30-3	3	30 X 72	39 X 48	2,030	1,700	3,300
H200HF-450-36-3	3	36 X 72	39 X 48	2,030	1,900	3,700
H200HF-600-3	3	36 X 72	39 X 48	1,640	2,100	4,100
H200HF-750-3	3	42 X 72	42 X 60	2,580	2,900	5,600
H200HF-900-3	3	42 X 72	50 X 60	4,130	3,350	6,400
H200HF-1200-3	3	48 X 72	50 X 60	4,130	3,850	7,500
H200HF-1200-4	4	48 X72	50 X 60	4,130	–––	–––
H200HF-1500-3	3	54 X 72	60 X 64	4,000	–––	–––
H200HF-1500-4	4	54 X 72	60 X 64	4,000	–––	–––
H200HF-1950-3	3	60 X 72	72 X 54	4,800	–––	–––
H200HF-1950-4	4	60 X 72	72 X 54	4,800	–––	–––

H200HF Capacity Ratings

	RESIN		RATED CAPACITY		FLOW RATES (gpm)		BKW
		LOW SALT	MEDIUM SALT	HIGH SALT
MODEL		LOW SALT	MEDIUM SALT	HIGH SALT	15 PSI	25 PSI
MODEL	CU.FT.	GRAINS/LBS	GRAINS/LBS	GRAINS/LBS	15 PSI	25 PSI	GPM
H200HF-300-24-3	10	190,000/60	280,000/100	320,000/150	120	170	12
H200HF-300-30-3	10	190,000/60	280,000/100	320,000/150	175	225	20
H200HF-450-30-3	15	285,000/90	420,000/150	480,000/225	158	212	20
H200HF-450-36-3	15	285,000/90	420,000/150	480,000/225	200	278	30
H200HF-600-3	20	380,000/120	560,000/200	640,000/300	189	257	30
H200HF-750-3	25	475,000/150	700,000/250	800,000/375	212	280	40
H200F-900-3	30	570,000/180	840,000/300	960,000/450	200	268	50
H200F-1200-3	40	760,000/240	1,120,000/400	1,280,000/600	213	280	70
H200HF-1200-4	40	760,000/240	1,120,000/400	1,280,000/600	310	445	70
H200HF-1500-3	50	950,000/300	1,400,000/500	1,600,000/750	225	307	90
H200HF-1500-4	50	950,000/300	1,400,000/500	1,600,000/750	340	495	90
H200HF-1950-3	65	1,235,000/390	1,820,000/650	2,080,000/975	235	325	110
H200HF-1950-4	65	1,235,000/390	1,820,000/650	2,080,000/975	445	650	110

1.H200HF-300-24-34 through H200HF-1200-4 are shown with fiberglass mineral tanks. All of these are also available with steel tanks.

2.H200HF-1500-3 through H200HF-1950-4 are available with steel tanks.

OPERATING CONDITIONS

1.Water Pressure 30 - 100 psi.

2.Water temperature is not to exceed 110°F and the unit cannot be subject to freezing conditions. Consult factory for higher water temperature applications.

3.Limit of 2 ppm of Ferrous Iron. Add 3 grains per gallon of hardness for each ppm of iron present.

4.Flex connectors and vacuum breakers are required when using the PolyGlass Composite mineral tanks.

5.Backwash flow rates are calculated at 4 gpm per sq. ft. of bed area and rounded off based on 50ºF water temperature.

H200HF Series Side Mount Dimensions-Fiberglass Tanks

MODEL	SYSTEM	OUTLET	INLET	DRAIN	MINERAL	BRINE
MODEL	HEIGHT	HEIGHTS	HEIGHTS	HEIGHTS	TANK	TANK
H200HF-300	92.8	17	85.5	--	24x72	24x50
H200HF-300-30	95.6	17	85.5	--	30x72	30x50
H200HF-450	95.6	17	85.5	--	30x72	39x48
H200HF-600	96.3	17	85.5	--	36x72	39x48
H200HF-750	101.9	17	85.5	--	42x72	42x60
H200HF-900	101.9	17	85.5	--	42x72	50x60
H200HF-1200	100.9	17	85.5	--	48x72	50x60

All dimensions ±1” and are subject to change without notice. Use as reference only. Call factory for optional tank & dimensional configurations.

Product Improvement designs are subject to change without notice.

HELLENBRAND, INC.

404 MORAVIAN VALLEY ROAD WAUNAKEE, WISCONSIN 53597

(608)849-3050 • FAX (608) 849-7398 www.hellenbrand.com

1/08-LBRY