Hellenbrand Means Quality and Reliability
Since 1967, Hellenbrand, Inc. has provided water solutions to the water treatment industry in the U.S. and around the world. Our growth in the water treatment industry is a direct result of pro- viding high quality products and supporting the applications for those products with over 200+ years of industry knowledge before, during and after the sale, which has resulted in multiple ap- plications over the years with the same customers.
H200 & H200HF Series Conditioners may either be top-mounted using a flange design or side- mounted using a side-mounted adapter, with either fiberglass or steel tanks. The H200 in- let/outlet opening is a two-inch FPT or 2.5” Victaulic. The H200HF "High Flow" Series uses a side-mount design with 2.5”, 3” or 4” high flow service valves to provide higher flow rates with minimal pressure loss. The lead free brass valve body has an NSF Approved Food Grade Elec- tro-Deposited Epoxy Coating to protect against corrosion, both internally and externally. Utilizing the proven technology of a piston and seal/spacer stack assembly and the powerful H200 micro- processor you can operate up to four tanks in parallel, alternating or demand recall/stage by flow and choose up to nine regeneration cycles in any order with a wide range of values for backwash, brine draw, slow rinse, fast rinse, refill and service allowing you to customize the H200/H200HF system for your particular application.
Brine Connector
Internal Meter (H200 Series Only)
Inlet
Outlet
| Removable |
Drain Connection | POD Display |