Argosy Research H200HF Series manual H200 Series, H200 Typical Single Tank Installation-Top Mount

H200 Series

A. MINERAL TANK: Fiberglass tank with Polyethylene Inner Shell and Fiberglass Roving Manufactured to Operate at 150 psi. NSF Approved.

B.DISTRIBUTOR SYSTEM: Two-Inch Hub & Lateral Dis- tributor for Maximum Service Flow and Minimal Pressure Loss.

C.MINERAL: High Capacity Ion Exchange Resin. Uniform and stable beads assure long life, high salt efficiency, and maximum hardness removal.

D.UNDERBEDDING: Multi-Layered Gravel Underbedding assures full usage of mineral bed and allows for a smooth and constant water flow for service and regeneration.

E.BRINE TANK: Rotationally Molded Polyethylene with Dust-Tight Cover.

F.GRID PLATE: Grid plate allows for dry salt storage. Avail- able in various sizes and heights.

G.OPTIONAL SAFETY BRINE VALVE: Acts as a Secondary Shut-Off for Timed Brine and may be used as a Primary Shut-Off without Timed Brine.

A

GB

E

C

D

F

Figure 1

H200 Typical Single Tank Installation-Top Mount

			Bypass Valve
1" MNPT	2” FNPT Inlet &	Inlet	Outlet
Brine Line
	2.5” Victaulic
2” FNPT Drain &	Brine Tank		Isolation Valves
2.5” Victaulic
Internal Meter	2” FNPT Outlet &		Flex Connectors
	2.5” Victaulic		Figure 2
		Shut-Off Valve

NOTE:

System connections to the tank must accommodate longitudinal movement between side, top and bottom openings, flexibility in piping or flex connectors are recommended.

Red colored piping, fittings, and connectors are for reference only and are not included. Must be furnished by others.

Union type connectors are recommended on the inlet and outlet connections.

1" Brine Line must be hard-piped, secured and supported for proper operation. CPVC or Schedule 80 PVC recommended.

H200 Twin Alternating Tank Installation - Top Mount

Shut-Off Valve	Bypass Valve
	Outlet
	Inlet
	MAV Valve*
	Isolation Valves
Brine Tank(s)	Brine Tank(s)
	Flex Connectors

See NOTE Figure 2	Shut-Off Valve	Figure 3
		8
MAV = Motorized Alternating Valve.