Connect the supply hoses: use 3/8” compression fittings (not included) to connect the hot and cold supply hoses to the stops. Use two wrenches, as shown in the diagram, to prevent the hoses from twisting.
Install the hose weight: proper po- sitioning of the hose weight insures that the hose will retract smoothly.
Install the hose weight to the handspray hose. Pull the hose out and guide it back into position. If it does not retract smoothly, or the sprayhead does not stay in place when resting in the spout, reposition the weight.
Turn on the water and check all connec- tions for leaks.
User instructions
Pivot the handle up to turn the water on, down to turn the water off. Pivot the handle to the right for cooler water, to the left for hot water.
If the flow of water diminishes, remove and clean the hose filter screen.