![](/images/new-backgrounds/1063725/6372531x1.webp)
Terreon® 54" |
|
TDB3104, WF3204 | Installation Instructions |
Installation Instructions continued . . .
Step 5: Valve and Tubing Connections
NOTE: Flush supply lines before making connections.
1.Attach hot and cold flexible supply lines to mixing valve assembly, two places (see Figure 11a and Figure 11b).
2.Hang valve assembly on pedestal valve bracket.
3.Use wire tie to secure valving to valve bracket.
VALVE AND TUBING CONNECTIONS - AIR METERING VALVE OPTION
NOTE: FLUSH SUPPLY LINES BEFORE MAKING CONNECTIONS.
DO NOT APPLY PIPE SEALANT TO COMPRESSION FITTINGS.
3/8" TUBE FROM
SPRAYHEAD
VALVE BRACKET
1/8" TUBING TO ACTUATOR
FLEXIBLE
HOSING
HOT SUPPLY
VOLUME CONTROL
THERMOSTATIC
MIXING VALVE
FLEXIBLE
HOSING
COLD SUPPLY
PEDESTAL
REAR
Figure 11b
16 | 2/8/07 | Bradley Corporation • |