3Com 3CB9LF36R, 3CB9LF36T manual Release Issues, Corrected Problems, System, Management, Ethernet

3

RELEASE ISSUES

This chapter discusses the following issues for major software Release 3.0:

	■	Corrected Problems
	■	System Issues
	■	Known Problems
	■	Documentation Changes
Corrected Problems	This section discusses problems that have been corrected in software
	Release 3.0.
	The numbers that appear in parentheses at the end of some descriptions
	are for internal 3Com use only.
System	■	The system no longer displays os socket err after you reset the
		chassis and during the system start-up procedures. (27650 and 29672)
	■ The 36-port 10/100BASE-TX Layer 2 modules (Model Numbers
		3CB9LF36R and 3CB9LF36T) no longer experience port lockup due to
		high port errors. (28668)
Management	■	Uploading a configuration file to a TFTP server no longer removes the
		file from the EME file system, as shown in the show file display.
		(23456)
Ethernet	■	On Layer 2 modules with fiber interfaces, the port mode defaults to
		100half, and no longer initially displays 100full as the state when
		you enter an ethernet portstate command. (25985)

■ The 36-port 10/100BASE-TX Layer 2 Fast Ethernet RJ-45 module (Model Number 3CB9LF36R) no longer asserts because of port duplex mode mismatch and TX underrun errors. (27365, 27362, and 29195)