Frigidaire FRA106CV1, FRA065AT7 important safety instructions Care and Cleaning

Page 11

Care and Cleaning & Energy Saving Ideas

Care and Cleaning

Tab

Air Filter

Clean your air conditioner occasionally to keep it looking new. Be sure to unplug

the unit before cleaning to prevent shock or fire hazards.

Air Filter Cleaning

The air filter should be checked at least once a month to see if cleaning is necessary. Trapped particles in the filter can build up and cause an accumulation of frost on the cooling coils.

Push the vent handle to the Vent Closed position(where applicable).

Open the front panel.

Grasp the filter by the center and pull up and out.

Wash the filter using liquid dishwashing detergent and warm water. Rinse filter thoroughly. Gently shake excess water from the filter. Be sure filter is thoroughly dry before replacing

Or instead of washing, you may vacuum the filter clean.

NOTE: When replacing the air filter after cleaning, make sure the tabs on the air filter are on the upper part of filter, and placed outward as shown in the drawing on the left side.

Cabinet Cleaning

Be sure to unplug the air conditioner to prevent shock or fire hazard. The cabinet and front may be dusted with an oil-free cloth or washed with a cloth dampened in a solution of warm water and mild liquid dishwashing detergent. Rinse thoroughly and wipe dry.

Never use harsh cleaners, wax or polish on the cabinet front.

Be sure to wring excess water from the cloth before wiping around the controls. Excess water in or around the controls may cause damage to the air conditioner. Plug in air conditioner.

Winter Storage

If you plan to store the air conditioner during the winter, remove it carefully from the window according to the installation instructions. Cover it with plastic or return it to the original carton.

Energy Saving Ideas

Do not block air flow inside with blinds, curtains or furniture; or outside with shrubs, enclosures, or other buildings.

The capacity of the room air conditioner must fit the room size for efficient and satisfactory operation.

Install the room air conditioner on the shady side of your home. A window that faces north is best because it is shaded most of the day.

Close the fireplace damper, floor and wall registers so cool air does not escape up the chimney and into the duct work.

Keep blinds and drapes in other windows closed during the sunniest part of the day. Clean the air filter as recommended in the section “Care and Cleaning”.

Proper insulation and weather stripping in your home will help keep warm air out and cool air in.

External house shading with trees, plants or awnings will help reduce the air conditioner’s work load.

Operate heat producing appliances such as ranges, washers, dryers and dishwashers during the coolest part of the day.

2009 Electrolux Home Products, Inc.

All rights reserved.

11

 

 

 

 

 

 

Image 11
Contents Use&Care Grounding type wall receptacle Important Safety InstructionsUnit must be upright for one hour prior to operating Product Registration Record Your Model and Serial Numbers Product Registration, Packaging & Normal SoundsTo Turn Unit on YOU will see Air Conditioner Features & Operating InstructionsElectronic Control Operating Instructions To Adjust FAN SpeedsTo USE Auto FAN Feature To Operate on FAN only YOU will see To USE the Energy Saver Econ Feature YOU will seeSleep Feature YOU will see Check Filter FEATURE, YOU will see Timer Delay Stop / Start FeatureRemote Sensing Feature on some models: To Change Temperature Display YOU will seeFresh Air Vent Control on some models Additional Things YOU should KnowCare and Cleaning Before You Call Occurrence SolutionExclusions This warranty does not cover the following Major Appliance Limited Warranty

FRA065AT7, FRA106CV1 specifications

Frigidaire is a well-known brand in the home appliance sector, renowned for its innovative cooling solutions. The Frigidaire FRA106CV1 and FRA065AT7 are two prominent air conditioning models that stand out due to their efficiency and user-friendly features.

The Frigidaire FRA106CV1 is a 10,000 BTU window-mounted air conditioner, specifically designed for cooling rooms up to 450 square feet. This model is particularly praised for its high-energy efficiency, achieving an Energy Efficiency Ratio (EER) of 12.1, which means it uses less energy to deliver powerful cooling. One of its standout features is the programmable timer, which allows users to set the unit to turn on or off at designated times, promoting energy savings. This model also features a quiet operation mode that ensures a peaceful environment, making it ideal for bedrooms or study spaces. The FRA106CV1 comes equipped with multiple cooling speeds and a fan-only mode, providing flexibility based on the user's comfort needs. Additionally, its washable filter is easy to access and clean, ensuring that air quality remains high while reducing maintenance costs.

On the other hand, the Frigidaire FRA065AT7 is a slightly smaller model, offering 6,000 BTUs of cooling power, making it suitable for spaces of up to 250 square feet. Like the FRA106CV1, this model is designed with energy efficiency in mind, featuring an EER of 12.2, which is excellent for a unit of its size. The FRA065AT7 includes mechanical controls, providing a straightforward interface for adjusting temperature and fan settings. Its ease of installation is another attractive aspect, as it comes with a convenient window mounting kit. The unit operates quietly, enhancing its suitability for small living areas, bedrooms, or home offices. It also has a washable filter that helps maintain air quality and reduces the frequency of filter replacements.

Both models are built with durable materials to withstand the test of time and provide reliable performance. With intuitive controls, energy-efficient operation, and reliable cooling power, the Frigidaire FRA106CV1 and FRA065AT7 air conditioners are excellent choices for homeowners seeking comfort and convenience in their living spaces. Each model offers unique features tailored to different room sizes, ensuring there is an option suitable for various cooling needs.