Operating Instructions
Operating Instructions
TO CHANGE TEMPERATURE SETTlNG: | YOU WILL SEE: |
DO THIS:
PRESS 
TO RAISE
PRESS 
TO LOWER
Note: Tap or hold either up ( 
) or down ( 
) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 60 °F (16 °C) and 90 °F (32 °C) for cooling mode. The temperature will be auto- matically maintained anywhere between 55 °F (13 °C) and 80 °F (27 °C) for heating mode. If you want the display to read the actual room temperature. See "To Operate on Fan Only" section on this page.
TO ADJUST FAN SPEEDS: | YOU WILL SEE: | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DO THIS:
PRESS TO SELECT
TO USE AUTO FAN FEATURE: | YOU WILL SEE: | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DO THIS:
PRESS FAN
BUTTON
SELECT AUTO
Note: Fan starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example, if the room doesn't get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will auto- matically go to the highest speed. The fan speeds will
TO OPERATE ON FAN ONLY: | YOU WILL SEE: |
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Except “Auto Fan”).
During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. Fan Only cannot be selected when the unit is in the “Remote Sensing” mode. (on those units with that feature).
6 | 2009 Electrolux Home Products, Inc. | All rights reserved. |
|
| |
|
|