Frigidaire FRA14EHT2, FRA08EHT1, FRA12EHT2, FRA106HT1 Check Filter Feature, Remote Sensing Feature

Page 8

Operating Instructions

Operating Instructions

(continued)

CHECK FILTER FEATURE:

YOU WILL SEE:

DO THIS:

PRESS FILTER

RESET BUTTON

Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) Will illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Filter Reset" button and the light will go off.

REMOTE SENSING FEATURE

(on some models)：

LIGHT pulsing ( On & Off intermittently ).

DO THIS:

PRESS REMOTE

SENSING

START BUTTON

NOTE: Unit display shows the set temperature

NOTE: Remote display

 

 

is actual temperature

 

at remote control only

Note: This feature can be activated from the remote control ONLY, the unit must be in a cooling mode.

To activate the remote sensing feature, point the remote control towards the unit and press the remote sensing Start button. Next, use the “ ” buttons to set the desired temperature at the remote. (Note that the set temperature will only be displayed on the unit itself ). The LIGHT on the unit control will pulse to indicate it received the signal. The LIGHT on the remote control will pulse each time it sends a signal. lt will periodically send this signal until the feature is deactivated by pressing the remote sensing Stop button. lf the unit does not receive the remote sensing signal during any 3 minute interval, the unit will beep to indicate the remote sensing mode has ended. The display on the remote control indicates the temperature at the remote ONLY.

NOTE: The Remote Sensing function is terminated either by using the Remote Sensing Stop button or the main ON/OFF button on the unit.

HEATING FEATURE(on some models)：

YOU WILL SEE:

DO THIS:

PRESS

MODE BUTTON

SELECT HEAT

Note: This feature can be used with any combination of FAN Speeds (Low speed only on 115V models), Timer, or Sleep Modes. When in the "Heat" mode,the fan will run continuously while heat is needed. The temperature will automatically be maintained anywhere between 55 °F(13 °C) and 80 °F(27 °C). When the room set temperature is satisfied, the fan will cycle off and on to circulate and sample the room air.

8

2009 Electrolux Home Products, Inc.

All rights reserved.

 

 

 

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Use&Care Important Safety Instructions For Your SafetyUnit must be upright for one hour prior to operating Product Registration & Normal Sounds Product Registration Record Your Model and Serial NumbersTo Turn Unit on Air Conditioner Features & Operating InstructionsElectronic Control To Adjust FAN Speeds To USE Auto FAN FeatureOperating Instructions To Operate on FAN onlyTo USE the Energy Saver YOU will see Feature Sleep FeatureCheck Filter Feature Remote Sensing FeatureFault Codes To Change Temperature DisplayTo Turn Unit OFF Additional Things YOU should KnowCare and Cleaning Occurrence Solution Before You CallMajor Appliance Limited Warranty Exclusions This warranty does not cover the following
Related manuals
Manual 3 pages 61.56 Kb

FRA106HT1, FRA12EHT2, FRA14EHT2, FRA086HT1, FRA106HT2 specifications

The Frigidaire FRA series of air conditioners, including models FRA08EHT1, FRA124HT2, FRA106HT2, FRA144HT2, and FRA086HT1, provide effective cooling solutions for various room sizes while offering a range of features aimed at enhancing user experience and comfort.

The FRA08EHT1 is designed for smaller spaces, with a cooling capacity of 8,000 BTUs. It features a compact design and is suitable for rooms up to 350 square feet. Its Energy Saver mode helps in reducing electricity costs by limiting compressor run time while its programmable timer allows users to set the unit to turn on or off at specified times.

Stepping up in capacity, the FRA124HT2 offers 12,000 BTUs of cooling power, making it suitable for rooms up to 550 square feet. This model includes both cooling and heating capabilities, providing year-round comfort. Its multi-speed fan allows users to customize airflow while the built-in air ionizer improves indoor air quality by reducing airborne particles.

The FRA106HT2 is similar to the FRA124HT2 in performance, providing 10,000 BTUs of cooling for medium-sized rooms. It offers quiet operation, thanks in part to its sound-dampening features, making it ideal for bedrooms or home offices. The adjustable airflow direction ensures effective cooling distribution, and its remote control adds convenience for adjusting settings from a distance.

For larger spaces, the FRA144HT2 stands out with its robust 14,000 BTU cooling capacity. It is capable of cooling areas up to 700 square feet, making it suitable for living rooms or open floor plans. This model features advanced temperature controls and a digital display that allows users to monitor and adjust settings easily. The energy-efficient design helps keep operating costs low.

Lastly, the FRA086HT1 is another versatile option, providing 8,000 BTUs and combining both cooling and heating functions. Its compact size caters to smaller to medium rooms while offering the benefit of an adjustable thermostat and easy-to-use controls.

All models in the Frigidaire FRA series prioritize energy efficiency, ensuring users benefit from effective cooling while minimizing environmental impact. With features like a washable filter for easy maintenance and user-friendly controls, these air conditioners are designed to meet diverse needs while providing a comfortable and refreshing indoor environment.
Top Page Image Contents