![](/images/new-backgrounds/1011458/1145817x1.webp)
Operating Instructions
Operating Instructions
(continued)
FAULT CODES:
If the display reads "HS" , a sensor has failed. Contact your Authorized Frigidaire Service Center.
If the display reads "AS" , a sensor has failed. Contact your Authorized Frigidaire Service Center.
If the display reads "ES" , a sensor has failed. Contact your Authorized Frigidaire Service Center.
TO CHANGE TEMPERATURE DISPLAY: | YOU WILL SEE: |
DO THIS:
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.
TO TURN UNIT OFF: | YOU WILL SEE: |
DO THIS:
PRESS
ON/OFF BUTTON
Note: When unit is shut off in the Heat Mode, the fan will continue to run for a few seconds to dissipate residual heat within the unit.
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.
There is a
The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees (in cool mode), 55F and 80F degrees (in heat mode).
After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
2009 Electrolux Home Products, Inc. | All rights reserved. | 9 | |
|
|
| |
|
|
|