Replacement Filter Assembly

WARNING: For your own safety, never connect plug to power source outlet until all assembly steps are com- plete and you have read and under- stood the safety and operation instruc- tions. Do not operate vac with any parts damaged or missing.

1.Carefully slide the filter over the filter cage, sliding it over the center ring cov- ering the 3 slots until the filter stops against the lid.

2.Place the hole in the filter plate over threaded stud of the filter cage.

3.Gently push on the filter plate to seat the rubber ring of the filter inside the circular channel of the filter plate.

4.Place filter nut onto threaded stud and tighten it down. Finger tighten only.

NOTE: Lever of filter nut should be away from plate as shown.

IMPORTANT: Do not overtighten as this may deform or crack the filter plate, filter cage, or filter.

NOTE: Your filter has a red stripe that matches an in-store displayer. When you visit your local Sears store, just remem- ber the color of your stripe for the correct size filter.

WARNING: To avoid personal injury or damage to vac be sure to keep hands, fingers, or any other foreign objects out of the center opening when assembling the float.

Filter Cage Assembly

NOTE: If filter cage needs to be removed, or replaced, use a flat blade screwdriver and insert the blade near one of the tabs between the filter cage and the center ring of the lid. Pry the tab out of the slot. Tilt the cage and lift away from the tid. Replace in the following manner:

1.Place the float over the opening in the center of the lid with the words "This

Side Towards Lid" laying face down over the hole.

2.Line up filter cage tabs with slots in the center ring of the lid.

3.Push on the filter cage until the tabs snap into slots for a secure fit.

Filter Cage _

Tabs (3) ._

Mac

Assembly

Filter Nut'_"'_i_			Filter	Nut
Lever	_	_	Filter	Plate
			Red Stripe
_			Threaded		Stud
		_--_-	Filter		Cage	_	ilter	Cage	Slots (3)
							Tabs (3)
							Slots	(3)

s 13)

113.179255 specifications

The Craftsman 113.179255 is a versatile and robust 15-amp table saw that has garnered attention among woodworking enthusiasts and professionals alike. Known for its reliability and precision, this model is designed to handle a variety of cutting tasks, making it a go-to tool for both beginners and seasoned woodworkers.

One of the standout features of the Craftsman 113.179255 is its powerful 15-amp motor, which provides ample cutting power for even the toughest materials. This motor is designed to deliver consistent torque, ensuring that the saw runs smoothly and efficiently, whether you're ripping through thick hardwood or making finer adjustments for detailed joinery.

The saw comes equipped with a 10-inch blade, which is optimal for a wide range of cutting applications. The blade can easily be adjusted for height and angle, allowing for both vertical and beveled cuts. Additionally, the tool features a cast aluminum tabletop that measures 27 inches by 18 inches, providing a stable and spacious work surface that can accommodate large workpieces.

Safety is a top priority with the Craftsman 113.179255, and it includes several key safety features. The saw is fitted with an anti-kickback pawl that helps prevent the workpiece from being thrown back at the operator. Furthermore, the blade guard effectively covers the blade when not in use, reducing the risk of accidental contact.

The table saw also incorporates a sturdy fence system that ensures accurate and straight cuts. The fence is easy to adjust and locks firmly into place, providing consistent performance throughout your projects.

Portability is another characteristic that enhances the appeal of the Craftsman 113.179255. While it's robust and stable, the saw is designed to be relatively lightweight, making it easier to move around your workspace or transport to job sites.

In summary, the Craftsman 113.179255 table saw combines power, precision, and safety, making it an excellent choice for anyone serious about woodworking. With its reliable motor, durable construction, and thoughtful features, this table saw is built to perform at a high level while ensuring the safety and satisfaction of its users. Whether you're tackling a DIY project or undertaking professional carpentry, this tool is designed to meet your woodworking needs.