Craftsman 113.179255 owner manual Operation, Emptying the Vac Canister, Vacuuming Dry Materials

Page 12

Operation (continued)

Vacuuming Dry Materials

1.The filter must always be in correct position to reduce the risk of leaks and possible damage to the vac.

2.When using your vac to pick up very fine dust, it will be necessary for you to empty the vac canister and clean the filter at more frequent intervals to main- tain peak vac performance.

NOTE: A dry filter is necessary to pick up dry material. If you use your vac to pick up dust when the filter is wet, the filter will clog quickly and be very difficult to clean.

3.ff your filter is wet but you need to use the vac to pick up dry material, you can

quickly dry the filter by running the vac without hose attached for about

10 minutes. The clean air rushing through the vac will help dry the filter.

The optional Craftsman HEPA Rated Material Filter, stock number 9-17912will

do a better job stopping very fine parti- cles than the 9-17816 filter.

Vacuuming Liquids

1.When picking up small amounts of liq- uid the filter may be left in place.

2.When picking up large amounts of liq- uid we recommend removing the vacu- um from the storage rack and placing it on the floor. When full of water the vac will weigh approximately 40 pounds and may be difficult to remove from the storage rack. Always empty vac and dry filter immediately after picking up liquids.

3.After using the vac to pick up liquids, the filter must be dried to reduce the risk of possible mildew and damage to the filter.

4.When the liquid in the vac canister reaches a predetermined level, the float mechanism will rise automatically to cut off airflow. When this happens, turn off the vac, unplug the power cord,

and empty the vac canister. You will know that the float has risen because

vac airflow ceases and the motor noise

will become higher in pitch, due to increased motor speed.

IMPORTANT: To reduce the risk of dam-

age to the vac do not run motor with float in raised position.

Emptying the Vac Canister

WARNING: To reduce the risk of

injury from accidental starting, unplug power cord before emptying the vac canister.

f. With the vacuum removed from the storage rack (see Removing Vac from Storage Rack section), remove the vac motor assembly from the vac canister assembly.

2.Lay vac motor assembly upside down on a clean area while emptying vac canister.

3.Dump the vac canister contents into the proper waste disposal container.

Sears recommended accessories are available at Sears retail stores.

WARNING: To reduce the risk of back injury or falls, do not lift a vac heavy with liquid or debris. Scoop or drain enough contents out to make the vac light enough to lift comfortably.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Craftsmanj Important Safety Instructions Extension Cord Length ! Gauge A.W.G Unpacking and Checking Carton Contents IntroductionReplacement Filter Assembly Filter Cage AssemblyStorage Rack Assembly & Mounting Assembling Accessory Bin to Lower RackLip of Rack Accessory Assembling Upper and Lower RackStorage Rack Assembly MountingMounting Storage Rack to Wail Clean N Carry Vac Assembly Vac AssemblyAssemblyVac Canister Lock VacMotor\ JHanging Vac on Storage RackStorage Rack Accessories Hanging Vac on Storage RackCord Storage Hose and Extension Wand StorageDiffuser Cap Assembly Hoses 14 & 7 Pos-I-LockOperation Emptying the Vac CanisterVacuuming Dry Materials Vacuuming LiquidsMaintenance InstallationClean NCarry Vac Cleaning FilterGallon Clean NCarry Wet/Dry Vac Model Number Repa PadsRepair Parts Gallon Clean NCarry Wet/Dry VacModel Number For in-home major brand repair service MY-HOME

113.179255 specifications

The Craftsman 113.179255 is a versatile and robust 15-amp table saw that has garnered attention among woodworking enthusiasts and professionals alike. Known for its reliability and precision, this model is designed to handle a variety of cutting tasks, making it a go-to tool for both beginners and seasoned woodworkers.

One of the standout features of the Craftsman 113.179255 is its powerful 15-amp motor, which provides ample cutting power for even the toughest materials. This motor is designed to deliver consistent torque, ensuring that the saw runs smoothly and efficiently, whether you're ripping through thick hardwood or making finer adjustments for detailed joinery.

The saw comes equipped with a 10-inch blade, which is optimal for a wide range of cutting applications. The blade can easily be adjusted for height and angle, allowing for both vertical and beveled cuts. Additionally, the tool features a cast aluminum tabletop that measures 27 inches by 18 inches, providing a stable and spacious work surface that can accommodate large workpieces.

Safety is a top priority with the Craftsman 113.179255, and it includes several key safety features. The saw is fitted with an anti-kickback pawl that helps prevent the workpiece from being thrown back at the operator. Furthermore, the blade guard effectively covers the blade when not in use, reducing the risk of accidental contact.

The table saw also incorporates a sturdy fence system that ensures accurate and straight cuts. The fence is easy to adjust and locks firmly into place, providing consistent performance throughout your projects.

Portability is another characteristic that enhances the appeal of the Craftsman 113.179255. While it's robust and stable, the saw is designed to be relatively lightweight, making it easier to move around your workspace or transport to job sites.

In summary, the Craftsman 113.179255 table saw combines power, precision, and safety, making it an excellent choice for anyone serious about woodworking. With its reliable motor, durable construction, and thoughtful features, this table saw is built to perform at a high level while ensuring the safety and satisfaction of its users. Whether you're tackling a DIY project or undertaking professional carpentry, this tool is designed to meet your woodworking needs.
Top Page Image Contents