Mitsubishi Electronics MCF-18TN/24TN manual FEEL... Auto Operation, Description of I FEEL... mode

Page 6

“I FEEL...” AUTO OPERATION

With the “ (I FEEL...)” auto operation mode, the optimum room condition can be set automatically with a one-touch operation.

˚C

CLOCK

AMPM

AMPM

To start operation:

■Press the button.ON/OFF

When the “ (I FEEL...)” mode is selected, the air conditioner is automatically controlled at the optimum temperature.

To stop operation:

■Press the button.ON/OFF

Description of “I FEEL...” mode

Details of operation

According to the room temperature when the operation starts, the operation mode is automatically set to either COOL or DRY. However, when operation is started again within 2 hours after it is stopped, the same operation mode before the operation is stopped is selected. The operation mode selected first is not changed even if the room tem- perature changes. If the operation mode does not match

the room condition, select the appropriate operation mode by pressing the MODE button.

Details of display on the indoor unit

The Operation Indicator lamps at the right side of the in- door unit indicate the operation state.

Operation Indicator

Lighted

Not lighted

ON/OFF TOO TOO

WARM COOL

FAN

STOP

I FEEL COOL

 

VANE

START

FAN DRY

 

MODE

HR.

ECONO COOL

MIN.

RESET CLOCK

 

If you feel slightly warm,

■ Press the

TOO

WARM

button to lower the tem-

perature.

 

One press lowers the temperature by about 1°C.

If you feel slightly cool,

■ Press the

TOO

COOL

button to raise the tem-

perature.

 

One press raises the temperature by about 1°C.

 

 

 

MODE

When “ (I FEEL...)” is not selected, press the

button until it is set.

 

Each time the button is pressed, the operation mode is

changed in sequence : (I FEEL...) → (COOL) → (DRY) →(FAN)

FAN STOP

I FEEL COOL

VANE START

FAN DRY

MODE

HR.

Details of auto operation

Room temperature

Operation mode

Target temperature

when started

 

(initial state)

 

 

 

About 25°C or higher

COOL

About 24°C

About 25°C or lower

DRY

—

 

 

 

Note:

When both Operation Indicator lamps are lighting, as the air conditioner is operating to reach the target tem- perature, the set temperature may not be changed. In this case, please wait until the lighting of Operation In- dicator lamp changes from two to only one and then change the set temperature.

Operation Indicator lamp

Indica-

 

Difference between

Operation state

target temperature

tion

and room

 

 

 

temperature

 

 

 

 

This shows that the air condi-

 

 

tioner is operating to reach the

About 2°C or

 

target temperature. Wait until

 

more

 

the target temperature is ob-

 

 

 

tained.

 

 

 

 

 

This shows that the room tem-

About 2°C or

 

perature is approaching the

 

less

 

target temperature.

 

 

 

 

 

ECONO COOL

MIN

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents MCF-18TN/24TN Contents Safety PrecautionsFor installation Indoor unit When installed on the floor Remote controller Name of Each PartOutdoor unit Preparation Before Operation Breaker for the air conditionerDescription of I FEEL... mode FEEL... Auto OperationConvenient Information To select the COOL, DRY or FAN modeManual Operation COOL, DRY, FAN Cool For effective coolingAIR Flow velocity and direction can be selected as required AIR Flow Velocity and Direction AdjustmentAuto AIR Flow Direction Control Operation To change the AIR Flow velocity, press the FAN buttonMaintenance TimerCleaning the air filter about once every 2 weeks Cleaning the deodorizing filter about once every 2 weeksDeodorizing filter Air cleaning filter When a power failure Occurs Answer not a malfunctionDoor unit blocked? INSTALLATION, Relocation and Inspection SpecificationsÍndice Precauciones DE SeguridadInstrucciones sobre la Instalación Botón ON/OFF funcionamiento/parada Nombre DE Cada PiezaUnidad exterior Entrada de aire posterior y lateralPreparación Antes DE LA Puesta EN Marcha Interruptor del aire acondicionadoMando a distancia cómo colocar las pilas y ajustar la hora Para poner en marcha Temperatura Automática a GustoDescripción del modo a GUSTO… Para apagarFresco Para una refrigeración efectiva Informacion PracticaPara seleccionar las opciones FRESCO, Seco o Ventilador Para cambiar la temperatura fijadaPosición recomendada de la paleta horizontal Control Automatico DE LA Dirección DEL AirePara cambiar la dirección horizontal del Flujo DE Aire NotasTimer Timer ON/OFF MantenimientoFiltro desodorizante Filtro limpiador del aireCuando se va la luz El acondicionador de Aire no se pone en MarchaNo refrigera lo Suficiente Compruebe lo siguiente ¿Se han agotado las pilas?INSTALACIÓN, Reubicación E Inspección Características Técnicas

MCF-18TN/24TN specifications

Mitsubishi Electronics has long been a leader in the field of air conditioning and climate control systems, and the MCF-18TN/24TN series exemplifies their commitment to innovation and efficiency. This series of air conditioning units is designed to provide both residential and commercial spaces with optimal comfort while maximizing energy savings.

One key feature of the MCF-18TN/24TN is its inverter technology. By using advanced inverter compressors, these units can adjust their cooling or heating output to match the specific requirements of a space. This results in less energy consumption compared to traditional fixed-speed units, as the compressor runs at variable speeds depending on the desired temperature. Inverter technology also enhances comfort by reducing temperature fluctuations and ensuring more consistent indoor conditions.

Another standout characteristic is the unit's high energy efficiency rating. The MCF-18TN/24TN is designed to operate efficiently even under varying load conditions. The high EER (Energy Efficiency Ratio) and COP (Coefficient of Performance) ratings mean that users can expect reduced electricity bills while still enjoying a comfortable environment. This is particularly beneficial in regions with extreme temperatures, where consistent heating and cooling are essential.

The MCF-18TN/24TN also incorporates advanced filtration systems, ensuring that indoor air quality is not compromised. With a multi-layered filtration system, these units effectively capture and eliminate airborne particles, allergens, and pollutants. This feature is especially important for those with respiratory issues or allergies, as it promotes a cleaner and healthier indoor environment.

Moreover, the user-friendly controls of the MCF-18TN/24TN series enhance the overall experience. The intuitive remote control and display panel allow users to easily adjust settings, set timers, and switch between cooling and heating modes with minimal effort. Smart features, such as programmable schedules and energy-saving modes, add an extra layer of convenience.

In terms of design, the MCF-18TN/24TN units are compact and aesthetically pleasing, making them a suitable addition to any modern space. Their sleek appearance complements a variety of interior styles while occupying minimal wall or floor space.

Overall, the Mitsubishi Electronics MCF-18TN/24TN series stands out for its combination of energy efficiency, advanced technology, and user-friendly operation. With its inverter technology, high energy ratings, superior air filtration, and smart features, these air conditioning units provide an effective and reliable solution for achieving consistent comfort in diverse environments.
Top Page Image Contents