Mitsubishi Electronics MCF-18TN/24TN INSTALLATION, Relocation and Inspection, Specifications

Page 12

INSTALLATION, RELOCATION AND INSPECTION

Installation place

Avoid installing the air conditioner in the following places.

•Where flammable gas could leak.

Caution:

Do not install the unit where flammable gas could leak. If gas leaks and collects around the unit, it may cause an explosion.

•Where there is much machine oil.

•Salty place such as the seaside.

•Where sulfide gas is generated such as a hot spring.

•Where oil is splashed or where the area is filled with oily smoke.

Keep the outdoor unit 3 m or more away from the antennas

of TV sets or radios.

Inverter type fluo- rescent lamp

Wall, etc.

To prevent the effect of

 

 

a fluorescent lamp, keep

 

Well-

it away as far apart as

 

possible.

 

ventilated

Keep a space to

 

dry place

prevent the pic-

 

 

ture distortion or

100mm or

 

the noise.

more

500mm or

 

 

TV

 

more

 

 

1m or more Radio

3 m

 

 

or more

 

Relocation

•When the air conditioner is to be removed or reinstalled because of rebuilding, moving, etc., special techniques and work are required.

Warning:

Repair or relocation should not be done by the customer.

If this is done incorrectly, it may cause a fire, electric shock, injury from the unit falling, water leakage, etc. Consult your dealer.

Disposal

•To dispose of this product, consult your dealer.

If you have any questions, consult your dealer.

Warning:

If the air conditioner operates but does not cool or heat (depending on model) the room, consult your dealer since there may be a refrigerant leak. Be sure to ask the service representative whether there is refrigerant leakage or not when repairs are carried out.

The refrigerant charged in the air conditioner is safe. Refrigerant normally does not leak, however, if refrigerant gas leaks indoors, and comes into contact with the fire of a fan heater, space heater, stove, etc., harmful substances will be generated.

Electrical work

•Provide an exclusive circuit for the power supply of the air conditioner.

•Be sure to observe the breaker capacity.

Warning:

The customer should not install this unit. If the unit is installed incorrectly, fire, electric shock, injury due to the unit falling, water leakage, etc. may result.

Caution:

•Earth the unit.

Do not connect the earth to a gas pipe, water pipe, lightning rod or the earth of a telephone. If the earthing is incorrect, it may cause an electric shock.

•Install an earth leakage breaker depending on the place where the air conditioner is to be installed (humid place, etc.).

If the earth leakage breaker is not installed, it may cause an electric shock.

Inspection and maintenance

•When the air conditioner is used for several seasons, the capacity may be lowered due to dirt inside the unit.

•Depending upon the conditions of use, an odor may be generated or dirt, dust, etc. may prevent proper drainage.

•It is recommended that the unit be inspected and maintained (charged) by specialist in addition to normal maintenance. Consult your dealer.

Operating sound considerations

•Do not put an object around the air outlet of the outdoor unit. It may cause lowering of capacity or increasing of operating sound.

•If abnormal sound is heard during operation, consult your dealer.

SPECIFICATIONS

Model

 

MCF-18TN

MCF-24TN

Function

 

 

 

Cooling

 

 

Power supply

 

 

 

1ø, 220V, 60Hz

 

 

Standard

 

SSA 385/386

 

JIS C 9612

SSA 385/386

 

JIS C 9612

Capacity

kW

4.4

 

5.1

5.5

 

6.3

kcal/h

3780

 

–

4720

 

–

 

 

 

Running current

A

11.2

 

9.6

16.3

 

13.4

Input

W

2300

 

1910

3400

 

2800

Refrigerant filling capacity (R-22)

kg

 

1.50

 

2.15

Note:

Rating condition

SSA 385/386

Cooling — Indoor: 29°C DB, 19°C WB

Outdoor: 46°C DB, 24°C WB

JIS C 9612

Cooling — Indoor: 27°C DB, 19°C WB

Outdoor: 35°C DB, (24°C WB)

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents MCF-18TN/24TN Contents Safety PrecautionsFor installation Indoor unit When installed on the floor Remote controller Name of Each PartOutdoor unit Preparation Before Operation Breaker for the air conditionerDescription of I FEEL... mode FEEL... Auto OperationTo select the COOL, DRY or FAN mode Manual Operation COOL, DRY, FANConvenient Information Cool For effective coolingAIR Flow Velocity and Direction Adjustment Auto AIR Flow Direction Control OperationAIR Flow velocity and direction can be selected as required To change the AIR Flow velocity, press the FAN buttonMaintenance TimerCleaning the air filter about once every 2 weeks Cleaning the deodorizing filter about once every 2 weeksDeodorizing filter Air cleaning filter When a power failure Occurs Answer not a malfunctionDoor unit blocked? INSTALLATION, Relocation and Inspection SpecificationsÍndice Precauciones DE SeguridadInstrucciones sobre la Instalación Nombre DE Cada Pieza Unidad exteriorBotón ON/OFF funcionamiento/parada Entrada de aire posterior y lateralPreparación Antes DE LA Puesta EN Marcha Interruptor del aire acondicionadoMando a distancia cómo colocar las pilas y ajustar la hora Temperatura Automática a Gusto Descripción del modo a GUSTO…Para poner en marcha Para apagarInformacion Practica Para seleccionar las opciones FRESCO, Seco o VentiladorFresco Para una refrigeración efectiva Para cambiar la temperatura fijadaControl Automatico DE LA Dirección DEL Aire Para cambiar la dirección horizontal del Flujo DE AirePosición recomendada de la paleta horizontal NotasTimer Timer ON/OFF MantenimientoFiltro desodorizante Filtro limpiador del aireEl acondicionador de Aire no se pone en Marcha No refrigera lo SuficienteCuando se va la luz Compruebe lo siguiente ¿Se han agotado las pilas?INSTALACIÓN, Reubicación E Inspección Características Técnicas

MCF-18TN/24TN specifications

Mitsubishi Electronics has long been a leader in the field of air conditioning and climate control systems, and the MCF-18TN/24TN series exemplifies their commitment to innovation and efficiency. This series of air conditioning units is designed to provide both residential and commercial spaces with optimal comfort while maximizing energy savings.

One key feature of the MCF-18TN/24TN is its inverter technology. By using advanced inverter compressors, these units can adjust their cooling or heating output to match the specific requirements of a space. This results in less energy consumption compared to traditional fixed-speed units, as the compressor runs at variable speeds depending on the desired temperature. Inverter technology also enhances comfort by reducing temperature fluctuations and ensuring more consistent indoor conditions.

Another standout characteristic is the unit's high energy efficiency rating. The MCF-18TN/24TN is designed to operate efficiently even under varying load conditions. The high EER (Energy Efficiency Ratio) and COP (Coefficient of Performance) ratings mean that users can expect reduced electricity bills while still enjoying a comfortable environment. This is particularly beneficial in regions with extreme temperatures, where consistent heating and cooling are essential.

The MCF-18TN/24TN also incorporates advanced filtration systems, ensuring that indoor air quality is not compromised. With a multi-layered filtration system, these units effectively capture and eliminate airborne particles, allergens, and pollutants. This feature is especially important for those with respiratory issues or allergies, as it promotes a cleaner and healthier indoor environment.

Moreover, the user-friendly controls of the MCF-18TN/24TN series enhance the overall experience. The intuitive remote control and display panel allow users to easily adjust settings, set timers, and switch between cooling and heating modes with minimal effort. Smart features, such as programmable schedules and energy-saving modes, add an extra layer of convenience.

In terms of design, the MCF-18TN/24TN units are compact and aesthetically pleasing, making them a suitable addition to any modern space. Their sleek appearance complements a variety of interior styles while occupying minimal wall or floor space.

Overall, the Mitsubishi Electronics MCF-18TN/24TN series stands out for its combination of energy efficiency, advanced technology, and user-friendly operation. With its inverter technology, high energy ratings, superior air filtration, and smart features, these air conditioning units provide an effective and reliable solution for achieving consistent comfort in diverse environments.
Top Page Image Contents