Before cleaning, Cleaning | Mitsubishi Electronics MSZ-GA25VA

CLEANING THE AIR OUTLET AND FAN OF THE INDOOR UNIT

Before cleaning

Switch the indoor unit off with the remote controller and disconnect the power supply plug and/or turn off the breaker, otherwise you may get injured since the fan of the in- door unit rotates at high speed during op- eration.

Cleaning

1Manually move the horizontal vane to the end towards you, and make sure the fan has stopped.

Upward.

2Remove the horizontal vane. Be sure to hold horizontal vane when unlocking the stoppers.

Follow the procedure, 1 and 2 , to remove the horizontal vane.

Right

Unlock.

Lock.

Stopper

Unlock.

3Swing the vertical vanes out one by one.

4Clean the air outlet and fan of the indoor unit. (Make sure the fan has stopped.)

•Be careful not to injure your hands.

•If the air outlet or fan is dirty, moldy, or dusty, clean with a wet or dry soft cloth or with the brush of QUICK CLEAN KIT which is installed to a vacuum cleaner. If the dirt is noticeable around the air outlet, clean with a cloth soaked in a solution of mild detergent diluted in lukewarm water.

•Please refer to the instructions described in QUICK CLEAN KIT for the details of the way to clean with the brush of QUICK CLEAN KIT. (packaged in outdoor unit).

•Do not use gasoline, benzine and polishing powder.

•Do not use excessive force to the fan. Otherwise, it may be cracked.

5Put the vertical vanes back to their original positions one by one.

1 Hold the tab of each vertical vane and insert the	2 Push each vertical vane until it clicks into place.
vertical vanes into their respective grooves.

Groove

•Be sure to hold the tabs to install the vertical vanes, otherwise the vanes can be damaged.

•Do not use excessive force to the fan guard during this procedure. The fan guard may be deformed and the vanes may not work properly.

•Put the vertical vanes back correctly to their original positions. Otherwise, condensed water may drip down from the indoor unit or the horizontal vane could malfunction.

6Install the horizontal vanes. (Reverse the removal procedures.)

2 Stopper

Left

Lock.

1Holding the unit lightly with one hand, grab the tab of each vertical vane with the other hand and

pull it downward to swing out each vertical vane.

Pull towards you.

Tab

2Hold the tab of each vertical vane and move the ver- tical vanes in the directions of the arrows.

The vanes cannot be removed.

Cannot be removed.

Swing to the left.

Swing to the right.

Insert this end first.

In procedure 2 lock the stoppers until they click into place.

After Cleaning

Insert the power supply plug into the power outlet and/or turn on the breaker. Check that all LED lamps are not blinking.

If they are blinking, the horizontal vane is not installed correctly.

•Be sure to hold the tab to swing out the vertical vanes, otherwise the vanes can be damaged.

•Do not use excessive force to the fan guard during this procedure. The fan guard may be deformed and the vanes may not work properly.

In this case, disconnect the power supply plug and/or turn off the breaker, and then reinstall the horizontal vane by following the procedures in step 6.

•If you operate the air conditioner after cleaning the air outlet and fan, do not get close to the air outlet as any remaining dirt may be discharged.

MSZ-GA25VA, MSZ-GA35VA, MSZ-GA22VA specifications

The Mitsubishi Electronics MSZ-GA series encompasses a range of wall-mounted split systems, including the MSZ-GA22VA, MSZ-GA25VA, and MSZ-GA35VA models, designed to provide efficient heating and cooling solutions for a variety of environments. Renowned for their advanced technology and user-friendly features, these air conditioning units are a perfect match for residential and light commercial spaces.

One of the standout features of the MSZ-GA series is the innovative INVERTER technology. This system intelligently adjusts the compressor speed, ensuring that the units operate at optimal efficiency. By maintaining a consistent temperature without constant on/off cycling, this technology significantly reduces energy consumption, leading to lower electricity bills and a reduced carbon footprint.

Another major aspect of these models is their powerful yet quiet operation. The units are designed with advanced noise-reduction technology, allowing them to function at low sound levels, making them ideal for bedrooms and living rooms where disturbances should be kept to a minimum. With noise levels as low as 19 dB(A), users can enjoy a peaceful indoor environment even while the system is running.

Additionally, the MSZ-GA22VA, MSZ-GA25VA, and MSZ-GA35VA models feature an elegant and compact design, which easily integrates into any interior decor. Their sleek and minimalist aesthetics do not compromise on performance, making them a favorite among homeowners and designers alike.

The series also comes with a user-friendly remote control, enabling easy temperature adjustments and settings from across the room. For added convenience, these models include a programmable timer feature, allowing users to set the system to operate according to their schedules. This flexibility not only enhances comfort but also optimizes energy usage.

Moreover, the MSZ-GA series incorporates a powerful air filtration system that helps improve indoor air quality. Featuring a washable anti-allergy enzyme filter, these units capture dust and allergens, making the air cleaner and healthier for occupants.

With a focus on energy efficiency, quiet operation, and advanced air purification, the Mitsubishi Electronics MSZ-GA22VA, MSZ-GA25VA, and MSZ-GA35VA represent an excellent choice for anyone seeking reliable and effective climate control solutions. Whether heating or cooling, these models ensure maximum comfort while minimizing energy usage and environmental impact.