Specifications

INSTALLATION, RELOCATION AND INSPECTION

Installation place

Avoid installing the air conditioner in the following places.

•Where flammable gas could leak.

CAUTION:

Do not install the unit where flammable gas could leak. If gas leaks and collects around the unit, it may cause an explosion.

•Where there is much machine oil.

•Salty places such as the seaside.

•Where sulfide gas is generated such as a hot spring.

•Where oil is splashed or where the area is filled with oily smoke.

•Where there is high-frequency or wireless equipment.

			The installation location of the outdoor unit should be
			at least 3 m away from the antennas for TV sets,
	Inverter-type		radios, etc. In areas where the reception is weak, pro-
	Inverter-type		vide greater space between the outdoor unit and the
To prevent the effects	fluorescent lamp		antenna of the affected device if operation of the air
To prevent the effects			conditioner interferes with radio or TV reception.
of a fluorescent lamp,			conditioner interferes with radio or TV reception.
of a fluorescent lamp,						wall, etc.
keep as far apart as						wall, etc.
keep as far apart as
possible.					Well-
					Well-
					ventilated
		Keep a space			ventilated
		Keep a space			dry place
		to prevent the
		picture
		picture
		distortion or		100 mm or
		the noise.		100 mm or
1 m		the noise.		more
				more

or more		TV			200 mm or
1 m		TV			more
or more
Cordless
phone or
Portable
phone Radio			3 m
			or more

CAUTION:

•Earth the unit.

Do not connect the earth to a gas pipe, water pipe, lightning rod or the earth of a telephone. If the earthing is incorrect, it may cause an electric shock.

•Install an earth leakage breaker depending on the place where the air conditioner is to be installed (humid places, etc.).

If the earth leakage breaker is not installed, it may cause an electric shock.

Inspection and maintenance

•When the air conditioner is used for several seasons, the capacity may be lowered due to dirt inside the unit.

•Depending on the condition, an odor may be generated or dehumidified water may not drain out smoothly due to dirt, dust, etc.

•It is recommended that the unit be inspected and maintained (charged) by specialist in addition to normal maintenance. Consult your dealer.

WARNING:

If the air conditioner operates but does not cool or heat (depending on model) the room, consult your dealer since there may be a refrigerant leak. Be sure to ask the service representative whether there is refrigerant leakage or not when repairs are carried out.

The refrigerant charged in the air conditioner is safe. Refrigerant normally does not leak, however, if refrigerant gas leaks indoors, and comes into contact with the fire of a fan heater, space heater, stove, etc., harmful substances will be generated.

Electrical work

•Provide an exclusive circuit for the power supply of the air conditioner.

•Be sure to observe the breaker capacity.

WARNING :

•The customer should not install this unit.

If installation is done incorrectly, it may cause a fire, an electric shock, or injury from the unit falling, water leaking, etc.

•Do not use intermediate connection of the power supply cord or the extension cord and do not connect many devices to one AC outlet.

A fire or an electric shock may result from poor contact, poor insulation, exceeding the permissible current, etc. Consult your dealer.

Operating sound considerations

•Do not put an object around the air outlet of the outdoor unit. This may lower the capacity or increase the volume of the operating sound.

•If an abnormal sound is heard during operation, consult your dealer.

Relocation

•When the air conditioner is to be removed or re-installed because of rebuilding, moving, etc., special techniques and work are required.

WARNING:

Repairs or relocation should not be done by the customer.

If this is done incorrectly, it may cause a fire, an electric shock, or an injury from the unit falling, water leaking, etc. Consult your dealer.

Disposal

To dispose of this product, consult your dealer.

If you have any questions, consult your dealer.

Set name

—

MSZ-GA25VA(H)

MSZ-GA35VA(H)

NOTE:

3. GA22 has no specifications for single com-

Model

1. Rating condition

bination. This indoor model is only for

Indoor

MSZ-GA22VA

MSZ-GA25VA

MSZ-GA35VA

Outdoor

—

MUZ-GA25VA(H)

MUZ-GA35VA(H)

Cooling —

Indoor:

27°C DB, 19°C WB

multi system air conditioner.

Function

Cooling

Heating

Cooling

Heating

Cooling

Heating

Outdoor:

35°C DB

As for the specifications of multi system,

Power supply

~ /N, 230V, 50Hz

Heating —

Indoor:

20°C DB

please confirm your dealer and/or refer to

Capacity

—

2.5

3.2

3.5

4.0

Outdoor:

7°C DB, 6°C WB

the catalogue.

Input

—

0.64

0.76

1.08

1.055

Weight

Indoor

2. Guaranteed operating range

Outdoor

—

Refrigerant filling

—

0.85

0.90

Indoor

Outdoor

capacity (R410A)

MUZ-GA25/35VA

MUZ-GA25/35VAH

IP code

Indoor

IP 20

32°C DB

46°C DB

Outdoor

—

IP 24

Upper limit

23°C WB

—

Permissible

LP ps

MPa

1.64

Cooling

21°C DB

-10°C DB

excessive

Lower limit

15°C WB

—

operating

HP ps

MPa

4.15

pressure

Upper limit

27°C DB

24°C DB

Indoor (Super High/

dB(A)

43/36/29/21

43/36/29/22

Heating

—

18°C WB

Noise level

High/Med./Low)

Lower limit

20°C DB

-10°C DB

-20°C DB

Outdoor

dB(A)

—

-11°C WB

-21°C WB

MSZ-GA25VA, MSZ-GA35VA, MSZ-GA22VA specifications

The Mitsubishi Electronics MSZ-GA series encompasses a range of wall-mounted split systems, including the MSZ-GA22VA, MSZ-GA25VA, and MSZ-GA35VA models, designed to provide efficient heating and cooling solutions for a variety of environments. Renowned for their advanced technology and user-friendly features, these air conditioning units are a perfect match for residential and light commercial spaces.

One of the standout features of the MSZ-GA series is the innovative INVERTER technology. This system intelligently adjusts the compressor speed, ensuring that the units operate at optimal efficiency. By maintaining a consistent temperature without constant on/off cycling, this technology significantly reduces energy consumption, leading to lower electricity bills and a reduced carbon footprint.

Another major aspect of these models is their powerful yet quiet operation. The units are designed with advanced noise-reduction technology, allowing them to function at low sound levels, making them ideal for bedrooms and living rooms where disturbances should be kept to a minimum. With noise levels as low as 19 dB(A), users can enjoy a peaceful indoor environment even while the system is running.

Additionally, the MSZ-GA22VA, MSZ-GA25VA, and MSZ-GA35VA models feature an elegant and compact design, which easily integrates into any interior decor. Their sleek and minimalist aesthetics do not compromise on performance, making them a favorite among homeowners and designers alike.

The series also comes with a user-friendly remote control, enabling easy temperature adjustments and settings from across the room. For added convenience, these models include a programmable timer feature, allowing users to set the system to operate according to their schedules. This flexibility not only enhances comfort but also optimizes energy usage.

Moreover, the MSZ-GA series incorporates a powerful air filtration system that helps improve indoor air quality. Featuring a washable anti-allergy enzyme filter, these units capture dust and allergens, making the air cleaner and healthier for occupants.

With a focus on energy efficiency, quiet operation, and advanced air purification, the Mitsubishi Electronics MSZ-GA22VA, MSZ-GA25VA, and MSZ-GA35VA represent an excellent choice for anyone seeking reliable and effective climate control solutions. Whether heating or cooling, these models ensure maximum comfort while minimizing energy usage and environmental impact.