Mitsubishi Electronics PAC-YG60MCA Confirmation of Parts, Specifications Product Specifications

3Confirmation of Parts

• Confirm that the box contains the following parts.

Number	Part Name	Quantity
1	PI controller	1
2	Installation/instruction manual (this document)	1

*In addition to the parts mentioned above, other parts need to be procured locally in order to operate this device. Furthermore, other Mitsubishi optional parts may be required depending on how the device is to be used.

For details, refer to "6 Installation Method".

4Specifications

4-1. Product Specifications

Item			Rating and Specification
Power Supply	24 VDC±10%: 5 W						Screw terminal block (M3)
	M-NET communication	17 to 30 VDC (*1)					Screw terminal block (M3)
		Number of contacts: 4
		Pulse signal:	a contact
		Pulse width:	100 ms to 300 ms
			(Idle period until next pulse: 100 ms or more)
Interface	Non-voltage a contact input			100 ms or more			Screwless terminal block
					100 ms ~ 300 ms
		Rated voltage: 24 VDC
		Rated current: 1 mA or less (*2)
Environment	Temperature	Operating temperature range				0 to 40°C [32°F to 104°F]
		Storage temperature range				-20 to 60°C [-4°F to 140°F]
Conditions
	Humidity	30 to 90%RH (no condensation)
Dimensions	200 (W) × 120 (H) × 45 (D) mm / 77/8 (W) × 43/4 (H) × 125/32 (D) in
Weight	0.6 kg / 1 3/8 lb
Current Time	If the power is cut, the internal capacitor will normally keep counting the current time for approximately one week.
Backup during
	(The internal capacitor takes approximately a day to charge. Replacement of a battery is not necessary.)
Power Failure
Installation	Inside a control panel (indoors)
Environment	* Use this product in a hotel, a business office environment or similar environment.

*1: Supply electric power from a power unit for the transmission line or an outdoor unit. Furthermore, the power consumption factor of the M-NET circuitry of this device is "1/4" (equivalent to one ME Remote Controller).

*2: Supply electric power from the main unit to the contacts of the meters.

4-2. External View

107.6 (41/4)

200(77/8)

150 (529/32)

52 (21/16) 46.5 (127/32) 4.5

(3/16)

This device complies with Part15 of the FCC Rules.Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.

[ 24 VDC Power Supply]

	45 (125/32)
	9 (3/8)
)	3 4/4
/1132
	)
4 (
110 (	120

15 (19/32)

26 (11/32) 83.5 (35/16) 27 (13/32)

)

1/32

1

26 (

Unit: mm (in)

2