Mitsubishi Electronics PAC-YG60MCA Connecting the Power Line and M-NET Transmission Line

Page 8

7-2. Connecting the Power Line and M-NET Transmission Line

Tightening torque for terminal screws: 1 N·m

Connect the device to a power supply unit (PAC-SC50KUA) for the transmission line or an outdoor unit (either a centralized

control line or indoor control line can be connected).

CN17

* Only the M-NET circuitry of this device receives the power from the

A/B/S

 

M-NET transmission line. The power consumption factor is "1/4"

 

 

(equivalent to one ME Remote Controller).

 

 

 

 

/ A

(M1)

 

 

 

 

B/

(M2)

 

 

 

 

M-NET

 

 

 

 

 

S

 

 

 

Circuit Onsite

R

 

 

 

 

(example)

 

 

 

 

Fuse

 

Arrester

 

 

 

 

 

 

 

AC Power Line

 

 

 

 

Varistor

 

Noise

 

 

 

Varistor

 

Uninterruptible

 

U

Filter

 

 

 

U

 

 

power supply

 

 

 

 

 

(UPS)

S

 

 

 

 

PI controller

24VDC

Power source

FG

CN16

V+/V-/FG

*Functional ground

Figure 7-1 Example of Connecting the Power Line and M-NET Transmission Line

Caution:

Use a power line and M-NET transmission line that satisfy the specifications described in "6-1 Parts to Procured Locally".

Attach a circuit comprising the following components to the supply primary side of the 24 VDC power supply.

(1)Varistor, (2) Arrester, (3) Noise filter, (4) Fuse

It is important to pay attention to the polarity when connecting to the 24 VDC power supply terminal block. Connecting the positive and negative in the reverse order will cause a failure.

Fix the power line and M-NET transmission line in place on the outside to ensure that the terminal block is not affected by any external force.

Not securely connecting and fixing the wires in place may cause heat generation and fire.

Make sure that the copper wiring is not short-circuiting the plates (cover, lower case) or neighboring wires.

Cover the shielded line of the M-NET transmission line with materials such as vinyl tape and prevent short-circuiting with the plates.

Note:

Connecting an Uninterruptible power supply (UPS) is recommended in order to prevent the loss of pulse data in the event of a power failure. If a UPS cannot be connected, try to make the AC power supply to the 24 VDC power supply as much same as the power supply line to the meters.

If this device is connected to an M-NET indoor control line and the outdoor unit is down because, for example, the power supply is interrupted for servicing or there is a failure, the PI controller cannot be set and monitored from the system controller.

7

Image 8
Contents PI controller Safety Precautions Device CapabilitiesExternal View Specifications Product SpecificationsConfirmation of Parts Example of System Configuration RestrictionsInstallation Method Parts to be Procured Locally Installation Procedure Wiring Method Names of Parts Wiring in the diagram has been simplifiedConnecting the Power Line and M-NET Transmission Line Equivalent to one ME Remote ControllerConnecting the Signal Lines Initial Setting Procedure Switch List Supported FunctionCommunication Error Status Display Display ContentDisplay Content List Precautions for Expansion Test RunPage Page WT04973X01

PAC-YG60MCA specifications

The Mitsubishi Electronics PAC-YG60MCA is an advanced control unit designed for optimizing and managing HVAC systems in commercial and residential settings. Featuring state-of-the-art technology, this model offers seamless integration with Mitsubishi's extensive range of heating and cooling solutions, ensuring enhanced energy efficiency and comfort for users.

One of the standout features of the PAC-YG60MCA is its ability to connect multiple units, allowing for centralized management of up to 60 indoor units simultaneously. This capability simplifies the control process for larger systems, providing users with a comprehensive overview of system performance and enabling easy adjustments to temperature settings, fan speeds, and operation modes based on specific preferences and requirements.

The PAC-YG60MCA utilizes a sophisticated control algorithm that prioritizes energy efficiency without compromising on performance. It incorporates advanced sensor technology, which monitors environmental conditions and adjusts system settings in real time. This not only helps to reduce operational costs but also contributes to environmental sustainability by minimizing energy consumption.

Another significant feature of the PAC-YG60MCA is its user-friendly interface, which includes a clear display and intuitive navigation. Users can easily program schedules, change settings, and monitor system performance through a simple menu structure. Additionally, the unit supports remote access via a smartphone app, allowing users to manage their HVAC systems from virtually anywhere, enhancing convenience and flexibility.

Durability and reliability are also key characteristics of the PAC-YG60MCA. Designed with high-quality materials, it can withstand various environmental conditions, ensuring long-lasting performance. The unit complies with stringent safety standards and undergoes rigorous testing to guarantee its robustness, making it a dependable choice for any HVAC installation.

In summary, the Mitsubishi Electronics PAC-YG60MCA is a cutting-edge control unit that enhances HVAC system management through its extensive features, including the ability to connect multiple units, energy-efficient operation, and user-friendly interface. Its advanced technology and durable design make it a valuable asset for both commercial and residential settings, ensuring optimal comfort while reducing energy costs. This model exemplifies Mitsubishi's commitment to innovation, efficiency, and customer satisfaction in the HVAC industry.