Electro-Voice manual XLC-118 Rear-Rigging-Point Structural Ratings

Page 23

+∅°

-∅°		+5°
-∅°		MAX
	-5°	MAX
	-5°
	MAX

Working-Load Limit 975 lb (422 kg)

From 0° to -12° (Swing Arm in Tension)

From +168° to +180° (Swing Arm in Compression) This is the Only Possible Angle Range

Figure 10:

XLC-118 Rear-Rigging-Point

Structural Ratings

ELECTRO-VOICE®

22

Image 23

Contents ELECTRO-VOICE ELECTRO-VOICE Table of ContentsRigging-Safety Warning Introduction Weight 116 lb 52.6 kgXLC-118 Loudspeaker System XLC Enclosure Rigging Hardware Details XLC Rigging SystemOverview of the XLC Flying System Typical XLC Flying System XLC Rigging Hardware XLC-127 and XLC-127+ Rigging Dimensions Correct Incorrect Array Considerations Rigging an Array Using the XLC Front DolliesXLC Rigging and Flying Techniques ELECTRO-VOICE ELECTRO-VOICE Flying XLC Systems with Front Dollies Step Dolly Clip Working-Load Limit and Safety Factor Definitions Simplified Structural-Rating Guidelines Structural Rating OverviewSimplified XLC Rigging-Rating Guidelines Complex Structural-Rating Analysis ELECTRO-VOICE MAX-∅ MAX+∅ XLC-127 and XLC-127+ Rear-Rigging-Point Structural Ratings XLC-118 Rear-Rigging-Point Structural Ratings Total Column Weight Working-Load Limit 2200 lb 998 kg Wind Loading Electro-Voice Structural-Analysis Procedures Electro-Voice XLC Loudspeaker Systems Rigging Inspection and PrecautionsELECTRO-VOICE Mechanical Engineering References ReferencesRigging References ELECTRO-VOICE ELECTRO-VOICE Telex Communications, Inc /2002 Part Number 38110-145 Rev a