Honeywell PCR-300 RC manual Access the second programming level by pressing, E00, E01, E02, E03

Page 11

uAccess the first programming level by pressing the and keys at the same time for 5 seconds.

uThen use the and keys to access the parameters to be changed.

uAccess the second programming level by pressing

the and and keys simultaneously for 5 seconds.

ITo exit from the programming levels and save the data, press the key after the last input parameter. If no key is pressed in either of the programming levels for 10 minutes, this mode will be exited without the data being saved.

IDo not display altered parameter data before saving the data, as it would be reversed to its original value in the process.

6.4 Setting the cold store temperature

Press and hold down the key. Adjust the setpoint for the value in question using the or key.

Adjustment is possible within the limits of the input parameters E12 and E13.

The factory setting is +4 °C.

6.5Changing the cold store temperature difference, defrost cycle and alarm tempera-ture

Access to the first programming level:

IPress and hold down the and keys at the same time for approx. 5 seconds (E01 appears in the display for

PCR-300 and E00 for PCR-300RC)

ISetting: Press and hold down the key. Adjust the setpoint value to the desired figure using the or key.

Input parameters and input ranges:

Display

 

Setting range

Preset

E00

Time, for PCR-300RC only

0.00 to 23.5,

12’0

 

 

see section 6.6

 

E01

Cold store temp. difference

1 to 20 K

2 K

E02

Time between 2 defrost cycles

1 to 24 h

8 hours

E03

Alarm temperature difference

–50 K to +50 K

20 K

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PCR-300 PCR-300 RC Installation and Operating Instructions Table of Contents Use for the purpose intended Unpacking the unit and conditions of useSources of danger FunctionSafety precautions Mounting of sensor Housing with 2 mounting tabsHousings with 1 mounting tab Electrical installationInstructions Terminal DescriptionFor PCR-300 RC only Activation of the back-up batteryOperation of the controller Switching on the operating voltageKey functions Temperature Clear alarmTemperature Value for excess Temperature alarmE00 Access the second programming level by pressingSetting the cold store temperature Input parameters and input rangesE2’2 Setting the time PCR-300RC onlyExiting programming mode Press the key several times PCR-300RC only E2’1Manual defrosting Access to the second programming levelE06 Important The times must be entered Ascending order E03E04 E05E17 To exit from the programming modeE15 E16Display Meaning MaintenanceFault Cause Remedy Warranty conditionsClearing alarm Only operate the unit in dry places PTCDr. Osthues + D / Production Manager EC Declaration of ConformityAutomation and Control Solutions

PCR-300 RC, PCR-300 specifications

The Honeywell PCR-300 and PCR-300 RC are advanced portable radiation detectors designed to meet the needs of various industries, including emergency response, nuclear power plants, and environmental monitoring. Known for their reliability and accuracy, these devices are essential in a world where radiation monitoring is increasingly crucial for safety and regulatory compliance.

The PCR-300 features a compact and lightweight design, making it easily transportable. This portability does not compromise its robust construction and ability to withstand harsh environmental conditions. With an intuitive user interface, the device allows users to operate it effectively even with minimal training.

One of the standout features of the PCR-300 is its dual-range detection capability. It can accurately measure gamma radiation levels across a wide spectrum, providing real-time data to users. The instrument is equipped with a scintillation detector, which enhances its radiation sensitivity, allowing for the detection of low levels of radiation that other devices might miss.

Additionally, the PCR-300 RC model includes advanced communication capabilities, which enable users to transmit data wirelessly. This feature is particularly beneficial for teams in the field, as it allows for instant data sharing and collaboration, enhancing situational awareness during critical missions.

Another notable technology incorporated into the PCR-300 series is its built-in GPS function. This feature facilitates the tracking of radiation readings along with geographical locations, providing crucial context during surveying or emergency response. The device is designed to store measurement data, allowing for easy retrieval and analysis after the mission is complete.

Durability is also a focus in the design of the PCR-300. The device is built to resist water and dust ingress, adhering to high IP (Ingress Protection) ratings. This ensures that the device can operate effectively in various environmental conditions without fear of damage.

Battery life is another important aspect of the PCR-300, with an extended operational time that allows users to conduct lengthy assessments without frequent recharging. The intuitive display screen provides clear visual feedback, showing real-time radiation levels, battery status, and operational alerts.

In summary, the Honeywell PCR-300 and PCR-300 RC are sophisticated tools equipped with cutting-edge technology. Their combination of portability, dual-range detection, GPS functionality, and advanced communication features make them indispensable for professionals tasked with monitoring radiation in diverse settings. With a focus on durability and extended battery life, these devices ensure that safety and efficiency are always prioritized in radiation detection efforts.
Top Page Image Contents