TABLE OF CONTENTS |
| ||
11 | Unpacking the unit and conditions of use | 3 | |
12 | General instructions | 3 | |
13 | Use and function | 3 | |
| 3.1 | Use for the purpose intended | 3 |
| 3.2 | Function | 4 |
14 | Safety | 4 | |
| 4.1 | Sources of danger | 4 |
| 4.2 | Safety precautions | 5 |
15 | Installation and commissioning | 5 | |
| 5.1 | Mechanical installation | 5 |
| 5.2 | Electrical installation | 6 |
| 5.3 | Setting the DIP switch for the emergency setpoint and |
|
|
| clock | 8 |
16 | Operating of the controller | 9 | |
| 6.1 | Switching on the operating voltage | 9 |
| 6.2 | Display | 9 |
| 6.3 | Key functions | 10 |
| 6.4 | Adjusting the cold store temperature | 11 |
| 6.5 | Changing the cold store temperature difference, defrost cycle, |
|
|
| and alarm temperature | 11 |
| 6.6 | Setting the time | 11 |
| 6.7 | Manual defrost | 12 |
17 | Programming | 13 | |
| 7.1 | Input parameters and ranges | 13 |
| 7.2 | Sensor calibration (parameters E 15 and E 16) | 15 |
18 | Maintenance | 16 | |
19 | Alarm messages | 16 | |
10 | Problem solving | 17 | |
11 | Conditions of warranty | 17 | |
12 | Technical data | 18 |
2