Shure A33LK specifications What’s Included, Specifications, Instructions for Use, Dimensions

Model A33LK User Guide FP33 Channel Expansion Cable

Features

Use the A33LK kit to connect a Shure FP24 to a Shure FP33 mixer. Combining an FP24 and a Shure FP33 (or FP32A) mixer yields a flexible, cost-effective, 5 X 2 field mix- ing setup with the following features:

SSimultaneously accepts a stereo microphone, hard-wired shotgun, and two RF lavalier microphones.

S48-volt phantom power for all five microphone inputs

SLimiters on the FP24 inputs

SInput assignment switches on the FP24 and pan pots on the FP33 inputs

STwo output buses—assignable to mic or line level output.

SMaster volume and headphone monitoring for all five inputs controlled from the FP33.

SCompact—FP24 adds little bulk to an existing FP33 package.

SThe FP24’s isolated external DC input jack eliminates ground related interference problems.

NOTE: The A33LK kit can also be used with the Shure FP23 to create a 4 X 2 setup.

What’s Included

SOne “Y” cable (XLR to 3-Pin Mini Connector)

STwo four-inch strips of 5/8” Velcro.

Specifications

Connectors

XLR 3-pin female to 3-Pin Mini Connector (TA3F)

Shipping Weight

170 grams (6 Oz.)

Dimensions

Length: 12.5”

RED		12.5”
2		R
3	1
BLACK	SHIELD	3-PIN MINI CONNECTOR
		L

DIMENSIONS

NOTE: When interconnecting the FP24 and FP33, inputs from the FP24 appear at the FP33 mixbus with their polarity reversed. (This is unavoidable due to the nature of the interconnection.) To avoid cancellation or interference effects (e.g., comb filtering) be- tween the signals from the FP24 and FP33 inputs, use Shure A15PRS polarity inverters on the FP24 inputs, or do one of the fol- lowing:

SKeep microphones connected to the FP24 as far away as possible from those connected to the FP33.

SFor microphones that must be close together (such as those in a stereo pair), connect them to the same mixer.

Instructions for Use

Connect the balanced, line level XLR outputs of the FP24 to the MIX BUS of the FP33 using the “Y” cable as shown. The red XLR connector goes to the right channel.

FP24 XLR–L

820 ohm

2

3

1

FP24 XLR–R

1

3

2 820 ohm

FP33 MIX BUS

31 2

SHURE Incorporated Web Address: http://www.shure.com 5800 W. Touhy Avenue, Niles, IL 60714–4608, U.S.A.

In U.S.A. Phone: 1-847-600–2000 Fax: 1-847-600-1212

In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414

WIRING DIAGRAM

In Asia, Phone: 1-852-2893-4290 Fax: 1-852-2893-4055

International Fax: 1-847-600-6446

2001, Shure Incorporated

27A8749 (Rev. 1)

Printed in U.S.A.