Kompernass KH 700 Assembling the food processor, Fitting the mixing bowl, Fitting the lid

Page 5

Use only the supplied original accessories since these have been optimised for interaction with the appliance.

Do not operate the appliance without ingredients. Overheating hazard!

Caution:

The blade z is very sharp! Exercise special care when inserting and removing or cleaning the blade z!

Caution:

While the machine is in use, only put those ingre- dients in the mixing bowl 9 or blender 4, which are to be processed. Do not put hands and foreign objects in the filling shaft q or blender 4 to avoid the risk of injury or damage to the machine.

Do not attempt to open the lid 0 of the mixing bowl 9 while in operation.

5.Before starting the appliance

Before starting the device ensure that...

-the device and all accessories and the power plug and the power cord are in perfect condition and...

all packaging materials have been removed from the appliance.

Prior to initial use clean all device components as described in the “Cleaning” chapter.

Assemble the food processor and note that…

- The food processer is in a firm and stable posi- tion. Secure the food processor on the working surface with the four suction cups.

-the mixing bowl 9 works only when the cover 5 for the motor block 6, the mixing bowl 9 and the lid 0 for the mixing bowl 9 have been properly fitted and engaged.

-the blender works only when the blender jug 4 and the blender lid 2 have been correctly fitted and engaged.

-when blender jug 4, mixer lid 2, mixing bowl 9 and the lid 0 of the mixing bowl 9 have been fitted, only the blender will work.

6.Assembling the food processor

6.1Fitting the mixing bowl

Place the cover 5 on the motor block 6 so that the arrow on the cover 5 points towards the open lock on the motor block 6. Turn the cover 5 anti- clockwise until it is firmly seated. The arrow now points towards the closed lock.

Position the mixing bowl 9 so that the arrow on the mi- xing bowl 9 points towards the open lock on the motor block 6. Take hold of the mi- xing bowl 9 with the handle and turn it clockwise as far as it will go. The arrow now po- ints towards the closed lock.

6.2Fitting the lid

Note:

Always ensure that the lid 0 is properly engaged before switching on the appliance!

Fit the lid 0 on the mixing bowl 9 so that the recesses of the lid 0 match the slots of the bowl 9. The marks on the lid 0 and the bowl 9 must match.

Turn the lid 0 clockwise until you hear an impact. The lug of the lid 0 now rests on the handle of the bowl 9.

- 3 -

Image 5
Contents Food Processor III Fitting the lid ContentSafety instructions Technical dataAppliance description Intended UseFitting the mixing bowl Assembling the food processorFitting the lid Before starting the device ensure thatInsert the ingredient by filling shaft and pusher Working with the mixing bowlWorking with the cutting blade Fit the mixing bowl 9 to the food processorRemove the cutting and grating discs I-VI from the holder Working with the cutting and gra- ting discsPlace the lid 0 on the bowl Working with the kneading bladePlace the mixing bowl 9 on the food processor Add the ingredients to the mixing bowlWorking with the blender Wipe the housing with a clean, damp cloth after each use Cleaning & CareMalfunctioning During operation, proceed as followsDisposal Warranty and serviceImporter Case of doubt, please contact your waste disposal centreTable for ingredients