•Place the lid 0 on the bowl 9 and the pusher w in the filling shaft q.
•Set the speed controller 7 to the level recommended in the table.
Hints:
•Put liquid ingredients into the bowl 9 last and start mixing at low speed to avoid splashing.
•Never fill the mixing bowl 9 above the MAX.mark (1.5l).
•For mixing “water like” liquids only use the speed 1 with maximum volume of 1 l to avoid liquid spilling out.
8. Working with the blender
Caution:
•Never switch on the blender when empty.
•Never insert the plug in the socket before the blender jug 4 and the blender lid 2 have been correctly assembled.
•Always pull the plug from the socket before removing the blender jug 4.
•Do not fill ingredients hotter than 80°C in the blender jug 4.
•To avoid splashing, never add more than 1.5l of liquid in the blender jug 4.
•Never remove the blender lid 2 during opera- tion.
•First remove the blender lid 2 before removing the blender jug 4.
•Never run the blender continuously for more than 3 minutes.
You can use the blender to finely puree and mix in- gredients. You can use the blender for preparing soups, sauces, milkshakes, baby food or process ve- getables and fruit into a puree
•First remove the cover 5 for the motor block 6 by turning it clockwise.
•Now place the liquidiser 4 in the opening, so that the arrow marking on the liquidiser 4 po- ints towards the open lock on the motor block 6. Turn the li- quidiser 4
•Place the cover 0 on the li- quidiser 4 so that the arrows on the handle of the liquidiser 4 and on the cover 0 point towards each other. Turn the cover 0
•Fill the ingredients in the blen- der jug 4. Cut them into smaller pieces beforehand if required.
•If required, insert the splash protection cap 1 and turn it
•Switch on the blender by setting the speed controller 7 to the desired level.
- 7 -