Electrolux TINSEB504MRR0 dimensions Product Dimensions, Model, Min. F Max Min. H Max

MICROWAVE WALL OVEN INSTALLATION INSTRUCTIONS

Installation and service must be performed by a qualified installer.

Important: Save for local electrical inspector's use. Read and Save these instructions for future reference.

The electrical requirements for this oven are 120 volts, 15 amps.

NOTE

1.Base must be capable of supporting 150 pounds (68.0 kg) for the Microwave Wall Oven only.

2.Make sure base is level and front of cabinet is square. If the cabinet base is not level, the oven will tend to slide

out when opening the door.

3. Minimum required distance is 36" (91.44 cm) from the	B
floor.

4.The outlet should not be located in the shaded area of Figure 1. It is required the outlet be a dedicated 120 volts with a 15amp rating for the appliance.

5.Minimum required distance between the Microwave Oven and the wall oven cutouts should be at least 3" leaving a 2" visible space between both product faceplates. Due to lower vent overlap, the visible space between units will be 1".

A C

23 ½"

(59.8 cm)

D

		I	G
			C
			L
			6"
			4"
20 ¾"	H	F
(52.7 cm)
to top of
cp angle			18"

Figure 1

PRODUCT DIMENSIONS

MODEL

A

B

C

D

27" (68.8) Microwave	27" (68.8)	221/4" (56.5)	247/8" (63.2)	21 11/16" (55.1)
30" (76.4) Microwave	30" (76.4)	221/4" (56.5)	273/8" (69.5)	21 11/16" (55.1)
30" (76.4) Convection	30" (76.4)	22" (55.9)	28" (71.1)	21 11/16" (55.1)
Microwave

CUTOUT DIMENSIONS AND CABINET WIDTH

MODEL

Min. F Max.

G

Min. H Max.

I

27" (68.8) Microwave	251/8" (63.8)	255/8" (65.1)	24" (61.0) min.	21"(53)	211/2"(54.6)	27" (68.8) min.
30" (76.4) Microwave		281/8" (71.4)	24" (61.0) min.	21"(53)	211/2"(54.6)	301/8" (76.5) min.
	275/8" (70.2)
30" (76.4) Convection	281/2"(72.4)	29" (73.7)	24" (61.0) min.	21"(53)	211/2"(54.6)	301/8" (76.5) min.
Microwave

All dimensions are in inches (cm).

E1 TINSEB504MRR0