Connecting to the mains
•The oven is delivered with the power cord and a plug for
•Earth protection minimizes the risks should a
make sure the cord is earthed.
This appliance must not be used on a
•Microwave power output : 900W
•This appliance complies with E.E.C. directive No.87/308 of 2.6.87 relative to radio interference suppression.
Information concerning UK installation
• If this appliance is fitted with a non- |
rewirable plug for which your socket is |
and the appropriate plug fitted. If it is |
necessary to change the fuse in a |
non |
be refitted. If the fuse cover is lost or |
damaged, the plug must not be used |
until a |
• The plug moulded on to the lead |
incorporates a fuse. For replacement, |
use a 13 Amp BS1362 fuse. Only ASTA |
IMPORTANT
•The wires in the mains lead are coloured in accordance with the following code:
GREEN AND YELLOW | EARTH |
BLUE | NEUTRAL |
BROWN | LIVE |
•If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug, proceed as follows:
Connect the green and yellow (earth) wire to the terminal in the plug which is marked with the letter ‘E’or the earth
symbol ( ) or coloured green and yellow.
Connect the blue (neutral) wire to the terminal in the plug which is marked with
the letter ‘N’or coloured black.
Connect the brown (live) wire to the terminal in the plug which is marked with the letter ‘L’ or coloured red.
GREEN & YELLOW | 13 AMP FUSE |
|
or BSI approved fuses should be used. |
• The plug must not be used if the fuse |
cover/carrier is lost. The cover/carrier is |
indicated by the coloured insert at the |
base of the plug. A replacement cover / |
carrier is indicated by the coloured |
insert at the base of the plug and must |
be obtained from your local Electrolux |
Service Centre. |
BLUE
BROWN
CORD
CLAMP
6