About the temperature controls. |
|
| ElectroluxUSA.com | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
The actual temperature may vary slightly from the set temperature based on usage and operating environment.
NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.
Safety Instructions Operating Instructions Installation Instructions
To change the temperature, press and release the up or down arrow button. To change the temperature, tap either the up arrow for warmer temperatures or the down arrow for colder temperatures until the desired temperature is displayed. Refrigerator temperatures can be adjusted between 34 °F and 46°F and the freezer temperatures can be adjusted between
Once the desired temperature has been set,
the temperature display will clear after 60 seconds.
To display the temperature, the Disp Temp button may be tapped.
Several adjustments may be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set.
Troubleshooting Tips
Performance Air Flow System
The Performance | wall of the refrigerator and the freezer. Placing food |
maximize temperature control in the refrigerator | in front of the louvers on these components will not |
and freezer compartments. This unique special | affect performance. |
feature consists of the Air Tower along the back |
|
5
Consumer Support