Installation 9
4Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer
To adjust the flipper mullion:
1Loosen the set screw located on the flipper mullion hinge.
Raising/Lowering Door
5
Set Screw
NOTE
If after adjusting doors higher the door makes a popping/clicking sound, remove set screw and replace with a longer one.
Adjusting Flipper Mullion Screw
2Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion.
Adjusting Flipper Mullion Height
3