Electrolux 86378-KG1 manual Fitting the Door Handles

Page 9

Remove the transport fittings from the storage shelves:

4. Slide the fittings securing the shelf forward to the thicker section on the edge of the storage shelf.

5. Take hold of the storage shelf at the back and together with the fit- tings slide the storage shelf far enough forward so that it can be hinged downwards and the fittings can be removed from the guides.

Fitting the Door Handles

To keep the amount of packaging down and to reduce the size for transporting, the door handles are not mounted when the appliance is delivered.

1 Take care! Do not tighten screws too tightly (max. 2 Nm), the door handles could be damaged.

The handles are packed separately on the padding in front of the door, the brackets and screws inside the appliance.

To mount, lay the appliance carefully on its back, if necessary. Use a piece of padding or a blanket as protection under the appliance.

01. Screw the top door bracket to the door handle (1). Mount the

bottom door bracket to the bottom of the door (2).

Important: Ensure door handle is correctly positioned

2. Mount top door bracket on the top of the door (3) and screw handle to bottom door bracket

(4).

818 36 55-00/3

9

Image 9

Contents Santo 86378-KG Santo 86378-KG1 Dear customer Contents Contents Prior to Installation Important Safety InstructionsInstallation Refrigerant Maintenance and Cleaning Child Safety During Use ServicingAppliance Transport Environmental InformationPackaging Old AppliancesBefore Use Remove the transport fittings from the storage shelves Fitting the Door HandlesScrew the top door bracket to the door handle 1. Mount Important Ensure door handle is correctly positionedInstallation Location InstallationAppliance Alignment Refrigerator/freezer needs ventilationWire coloured green Yellow must be connected to Electrical ConnectionTerminals in your plug, proceed Reversing The Door Carbon filterInserting and changing the active carbon filter View of Appliance Appliance DescriptionCold Accumulation Block Freezer trayTemperature setting buttons These buttons are connected to the temperature displayControl panel Reset button Temperature DisplaysMode button Text displayNo words appear in the display Remove the cold accumulation block from the appliance Prior to Initial Start-UpInitial Start-Up Temperature AdjustmentTip Shopping Operating modesFrostmatic and Coolmatic CoolmaticHoliday Switching the Appliance OffSwitching off freezer section when fridge switched on To switch the fridge section on again, press + or buttonTo switch the freezer section on again, press + or button Switching off freezer section when fridge switched offPower cut warning Control and Information SystemsOpen door warning Temperature warning For the fridge sectionFor the freezer section Opening the Freezer Compartment Door Function ErrorsStorage Shelves Interior AccessoriesVariable Inner Door Longfresh 0 C cold zoneQuick Chill Shelf Setting the air moistureBottle- and Can Holder Dismantling of the Bottle- and Can HolderBottle Holder Quick chillChilling of cans or bottles Chilling of foodCorrect storage Guidelines for storage times Some foods in the Longfresh 0 C cold zone Dry storageMoist storage Fruit Storage period TipsFreezing Tips Frozen StorageStorage Goods Symbols/Freezing Calendar Preparation of Ice CubesDefrosting Freezer Compartment Defrosting Internal Cleaning Maintenance and CleaningAfter everything is dry place appliance back into service External CleaningReplacing the light bulb Hints and Tips Energy Saving AdviceNormal Operating Sounds Food StorageWhat to do if Symptom SolutionRefrigerant circuit has been checked for leaks Regulations, Standards, GuidelinesRefrigerant Circuit Technical TerminologyEvaporator CompressorStandard Guarantee Conditions Guarantee Conditions08705 929 Service & Spare PartsCustomer Care Calls may be recorded for training purposesSubject to change without notice