Electrolux 86378-KG1 manual Control panel, Temperature setting buttons

Page 16

Appliance Description

Control panel

1ON/OFF button

2Fridge section indicator

3Temperature indicator for fridge section (not for LONGFRESH 0 °C cold section)

4Buttons for setting temperature for fridge section

5Thermometer indicator for fridge section (with COOLMATIC)

6MODE button for setting the operating mode

7Text display

8RESET button

9Freezer section indicator

10Temperature indicator for freezer section

11Buttons for setting temperature for freezer section

12Thermometer indicator for freezer section (with FROSTMATIC)

Temperature setting buttons

The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons.

These buttons are connected to the temperature display.

•The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the dis- play of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER).

•Each time one of the two buttons is pressed again the DESIRED tem- perature is adjusted by 1 °C.

•If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature.

DESIRED temperature means:

The temperature that has been selected for inside the fridge or the freezer compartment. The DESIRED temperature is indicated by flashing numbers.

16	818 36 55-00/3

Image 16

Contents Santo 86378-KG Santo 86378-KG1 Dear customer Contents Contents Important Safety Instructions Prior to InstallationInstallation RefrigerantChild Safety Maintenance and CleaningDuring Use ServicingEnvironmental Information Appliance TransportPackaging Old AppliancesBefore Use Fitting the Door Handles Remove the transport fittings from the storage shelvesScrew the top door bracket to the door handle 1. Mount Important Ensure door handle is correctly positionedInstallation Installation LocationRefrigerator/freezer needs ventilation Appliance AlignmentElectrical Connection Wire coloured green Yellow must be connected toTerminals in your plug, proceed Carbon filter Reversing The Door Inserting and changing the active carbon filter Appliance Description View of ApplianceFreezer tray Cold Accumulation BlockThese buttons are connected to the temperature display Temperature setting buttonsControl panel Temperature Displays Reset buttonText display Mode buttonNo words appear in the display Prior to Initial Start-Up Remove the cold accumulation block from the applianceTemperature Adjustment Initial Start-UpTip Operating modes ShoppingCoolmatic Frostmatic and CoolmaticSwitching the Appliance Off HolidayTo switch the fridge section on again, press + or button Switching off freezer section when fridge switched onTo switch the freezer section on again, press + or button Switching off freezer section when fridge switched offControl and Information Systems Power cut warningOpen door warning For the fridge section Temperature warningFor the freezer section Function Errors Opening the Freezer Compartment DoorInterior Accessories Storage ShelvesVariable Inner Door Longfresh 0 C cold zoneSetting the air moisture Quick Chill ShelfBottle- and Can Holder Dismantling of the Bottle- and Can HolderQuick chill Bottle HolderChilling of cans or bottles Chilling of foodCorrect storage Some foods in the Longfresh 0 C cold zone Dry storage Guidelines for storage timesMoist storage Tips Fruit Storage periodFreezing Frozen Storage TipsPreparation of Ice Cubes Storage Goods Symbols/Freezing CalendarDefrosting Freezer Compartment Defrosting Maintenance and Cleaning Internal CleaningExternal Cleaning After everything is dry place appliance back into serviceReplacing the light bulb Energy Saving Advice Hints and TipsNormal Operating Sounds Food StorageSymptom Solution What to do ifRegulations, Standards, Guidelines Refrigerant circuit has been checked for leaksTechnical Terminology Refrigerant CircuitEvaporator CompressorGuarantee Conditions Standard Guarantee ConditionsService & Spare Parts 08705 929Customer Care Calls may be recorded for training purposesSubject to change without notice