Do not connect the appliance in spaces where ambient temperature can decrease to below freezing.
The appliance may only be connected to drinking water supplies. The appliance may only be connected to cold water supplies.
INSTALLATION
Unpacking
Unpack the cabinet and check that it is in good condition and free of any transport damage. Notify the dealer immediately of any damage. Hand the packaging over for recycling. For more information, contact your local council or the dealer.
Do not allow children to play with the packaging. The plastic film can cause suffocation.
Remove the transport supports
Remove the tape and the transport supports from
·the door sides
·inside the door hinges
·the shelves
Remove the transport support on the glass shelf by pushing the support forward along the edge of the shelf until it stops. Take hold of the rear edge of the glass shelf and pull the shelf and transport support forward until the shelf tilts and the transport support can be removed. Some models are fitted with a silencing pad under the cabinet. Do not remove this pad.
Cleaning
Wash the inside of the cabinet using lukewarm water, a mild
Connecting the water hose.
The water coupling is connected to a water tap with an external 3/4 inch thread.
This work is to be carried out by a skilled plumbing installation technician. The refrigerator is to be connected with a
The water hose must not be cracked, squeezed or be in tight bends.
20