MICROFLASH 8I PRINTER USER'S GUIDE

Installing and/or Replacing Batteries

1.Open the printer’s cover. Verify the control panel is facing toward you.

2.Place the battery in the battery cavity (Figure 11).

Figure 11

3.Connect the printer's cable connector to the battery (Figures 12a and 12b). Verify the printer's battery connector is aligned properly. The rubber key (on the printer's battery connector) should be aligned with the bottom notch (on the battery).

Figure 12a

Figure 12b

Rubber key

8

Page 8
Image 8
O'Neil For 8100 manual Installing and/or Replacing Batteries