MICROFLASH 8I PRINTER USER'S GUIDE
5.Fold the stack of paper in half with the short sides together and with the top of the form coming out from the inside fold (Figure 17).
6.Place the paper into the paper cavity with the bottom edges under the paper lip in the bottom of the cavity (Figure 18).
Figure 17
Figure 18
7.Feed the top of the form from the inside of the fold through the tractor feed pins and to the outside edge of the printer.
8.Align the holes in the paper with the studs in the tractor feed wheel (Figure 19).
9.The left tractor feed is adjustable. Lift the locking lever to release the tractor feed.
10.Verify that the paper is taut and the paper feeds correctly.
11.Close the tractor feed clips, the print mechanism, and the printer’s cover (Figure 20).
|
|
|
Figure 19 |
| Figure 20 |
12.Set top of form. For more information, see Setting Top of Form (TOF) on page 13.
11